No edit summary |
No edit summary |
||
(2 intermediate revisions by the same user not shown) | |||
Line 21: | Line 21: | ||
==Using 3D prints== | ==Using 3D prints== | ||
==='''3D | ==='''3D Printed Underwater VR'''=== | ||
'''Zhang, W. Tien Tan, C. Chen, T. ''Demo: A safe Low-cost HMD for Underwater VR Experiences'', Mobile Graphics and Interactive Applictions, Article 12, 2016''' | '''Zhang, W. Tien Tan, C. Chen, T. ''Demo: A safe Low-cost HMD for Underwater VR Experiences'', Mobile Graphics and Interactive Applictions, Article 12, 2016''' | ||
*3D printers are able to print parts that are waterproof | *3D printers are able to print parts that are waterproof | ||
*Specific density and infill settings are needed | *Specific density and infill settings are needed | ||
*Can 3D print components that prevent leaks | *Can 3D print components that prevent leaks | ||
URL: https://dl.acm.org/citation.cfm?id=2999519 | |||
==='''Underwater Homes'''=== | |||
'''Champion, B. Jamshidi, M. Joordens, M. ''3D Printed Underwater Housing'', World Automation Congress (WAC), 2016''' | |||
*Polylactic Acid (PLA) absorbs water since it is bio-degradable | |||
*Acrylonitrile Butadine Styrene (ABS) is a stong material | |||
*ABS does not absorb water so no coating is needed | |||
*ABS can be smoothed by a coating of acetone which prevents leakage | |||
*Waterproof seals can be a flat seal, O-ring, or gasket | |||
URL: https://ieeexplore.ieee.org/abstract/document/7582993 | |||
==='''Underwater Camera'''=== | |||
'''Digumarti, S. Chaurasia, G. Taneja, A. Siegwart, R. Thomas, A. Beardsley, P. ''Underwater 3D capture using a low-cost commercial depth camera'', IEEE Winter Conference on Applications of Computer Vision (WACV), 2016''' | |||
*Used acrylic sealed with silicone to cover the electronics | |||
URL: https://ieeexplore.ieee.org/abstract/document/7477644/authors#authors |
Revision as of 18:18, 6 November 2018
Waterproofing 3-D prints from the makers
- epoxy coat after or purpose made 3DP coating-- add commercial versions here:
- thicker layers, more perimeters,solid, smooth chemically https://www.fabbaloo.com/blog/2017/10/19/waterproofing-your-3d-prints
- For chemical smoothing can use results from this paper for any type of 3DP material Chemical Compatibility of Fused Filament Fabrication-based 3-D Printed Components with Solutions Commonly Used in Semiconductor Wet Processing
- Wax- https://www.instructables.com/id/Using-Wax-to-Waterproof-3D-Prints/
- Purposefully overextrude - https://hackaday.com/2018/04/17/3d-printing-watertight-containers/
- Epoxy Clay or plumbers goop - https://nrqm.ca/2012/11/waterproofing-3d-prints-epoxy-cla/
Using Coating as a waterproofing Technique
Coating and Lamination
Singa, K.A review on coating & Lamination in Textiles:Processes and Applications,American Journal of Polymer Science,2012
- Polyurethane (PU) is used to waterproof clothing
- Perfluoro, Polyacrylates, PVC, and Vinylacetate are chemicals used as coatings for waterproofing
- Butadiene Polyurethane resin is also used as a coating to waterproof objects
- Direct and transfer coating are best for waterproofing
URL: http://article.sapub.org/10.5923.j.ajps.20120203.04.html
Using 3D prints
3D Printed Underwater VR
Zhang, W. Tien Tan, C. Chen, T. Demo: A safe Low-cost HMD for Underwater VR Experiences, Mobile Graphics and Interactive Applictions, Article 12, 2016
- 3D printers are able to print parts that are waterproof
- Specific density and infill settings are needed
- Can 3D print components that prevent leaks
URL: https://dl.acm.org/citation.cfm?id=2999519
Underwater Homes
Champion, B. Jamshidi, M. Joordens, M. 3D Printed Underwater Housing, World Automation Congress (WAC), 2016
- Polylactic Acid (PLA) absorbs water since it is bio-degradable
- Acrylonitrile Butadine Styrene (ABS) is a stong material
- ABS does not absorb water so no coating is needed
- ABS can be smoothed by a coating of acetone which prevents leakage
- Waterproof seals can be a flat seal, O-ring, or gasket
URL: https://ieeexplore.ieee.org/abstract/document/7582993
Underwater Camera
Digumarti, S. Chaurasia, G. Taneja, A. Siegwart, R. Thomas, A. Beardsley, P. Underwater 3D capture using a low-cost commercial depth camera, IEEE Winter Conference on Applications of Computer Vision (WACV), 2016
- Used acrylic sealed with silicone to cover the electronics
URL: https://ieeexplore.ieee.org/abstract/document/7477644/authors#authors