User:Ejhunt: Difference between revisions

Latest revision as of 16:01, 28 February 2024

User data
Name	Emily Hunt
Affiliations	Michigan Technological University
Location	Michigan, USA
Interests	OSH
Groups	777-2014 People
Courses	MY4777
Registered	2013
Impact	16,274
Contributions	3D printable science equipment Syringe pump literature review Automated microscope stage literature review Micro-Turbines for Water Power Low Temperature High Strength Bainite Literature Review Digital mass protocol:MOST MOST Printer Log Super Bainite METHODS

I am an undergraduate senior working towards a BS in Materials Science and Engineering, with a certificate in German Language and Culture. As an undergraduate researcher for Michigan Tech's Open Sustainability and Technology lab my research is focused on additive manufacturing, working on open sourced hardware, polymer filament recycling, and metal printing and post-printing processing techniques.

Education[edit | edit source]

B.S. Materials Science and Engineering, Michigan Technological University (Expected Graduation Dec 2017)

-Certificate in German Language and Culture

---Study Abroad Spring 2015 Berlin, Germany

Current Projects[edit | edit source]

Super Bainite

Publications/Presentations[edit | edit source]

Bas Wijnen, Emily J. Hunt, Gerald C. Anzalone, Joshua M. Pearce, 2014. Open-source Syringe Pump Library, PLoS ONE 9(9): e107216. doi:10.1371/journal.pone.0107216 open access
Emily J. Hunt, Chenlong Zhang, Nick Anzalone, Joshua M. Pearce, Polymer recycling codes for distributed manufacturing with 3-D printers, Resources, Conservation and Recycling, 97, pp. 24-30 (2015). DOI:10.1016/j.resconrec.2015.02.004 open access
Bas Wijnen, Emily E. Petersen, Emily J. Hunt, and Joshua M. Pearce. Free and Open Source Automated 3-D Microscope. Journal of Microscopy 264(2), 238-246 (2016).
"Open Source Syringe Pump", D80 Conference. Houghton, MI, October 2014

MY 4777 Projects[edit | edit source]

Built MTU Delta 3D-Printer
Rockwall Project
Celtic Mashup Project: YouMagine Page and Project Page

@@ Line 1: / Line 1: @@
-{{userboxtop}}
+[[File:pump pic.jpg|thumb]]
-{{User MOST}}
-{{User OSH}}
-{{userboxbottom}}
-==Emily Hunt==
-==Bio==
+{{User data
+| name = Emily Hunt
+| interests = OSH
+| groups = 777-2014 People
+| courses = MY4777
+| organizations = MTU
+| location = Michigan, USA
+}}
-Emily Hunt is an undergraduate student at [[Michigan Technological University]] majoring in Materials Science and Engineering and working on an International Minor in German Language and Culture. Her interest is in metallurgy and materials with electrical properties. Currently she has the Stoyack-Link Internship to work on Open Source Linear Actuators in MOST for the 2013-2014 academic year.
+I am an undergraduate senior working towards a BS in Materials Science and Engineering, with a certificate in German Language and Culture. As an undergraduate researcher for Michigan Tech's Open Sustainability and Technology lab my research is focused on additive manufacturing, working on open sourced hardware, polymer filament recycling, and metal printing and post-printing processing techniques.
-[[Image:Senior_pic.jpg‎|thumb]]
+=== Education ===
-==Projects==
+* B.S. Materials Science and Engineering, Michigan Technological University (Expected Graduation Dec 2017)
-'''Syringe Pump'''
-[http://www.appropedia.org/Syringe_pump_literature_review|Syringe Pump Literature Review]
+:-Certificate in German Language and Culture
+:---Study Abroad Spring 2015 Berlin, Germany
-[http://www.appropedia.org/Motor_force_protocol|Motor Force Protocol]
+=== Current Projects ===
-[http://www.appropedia.org/Digital_mass_protocol|Digital Mass Protocol]
+* Super Bainite
-'''DeltaBot Build and Workshops'''
+=== Publications/Presentations ===
-[http://www.appropedia.org/Delta_Build_Overview:MOST|Delta Build Overview]
+* Bas Wijnen, Emily J. Hunt, Gerald C. Anzalone, Joshua M. Pearce, 2014. [http://www.plosone.org/article/info%3Adoi%2F10.1371%2Fjournal.pone.0107216 Open-source Syringe Pump Library], ''PLoS ONE'' 9(9): e107216. [http://dx.plos.org/10.1371/journal.pone.0107216 doi:10.1371/journal.pone.0107216] [https://www.academia.edu/8369549/Open-Source_Syringe_Pump_Library open access]
+* Emily J. Hunt, Chenlong Zhang, Nick Anzalone, Joshua M. Pearce, [http://dx.doi.org/10.1016/j.resconrec.2015.02.004 Polymer recycling codes for distributed manufacturing with 3-D printers], ''Resources, Conservation and Recycling'', '''97''', pp. 24-30 (2015). DOI:10.1016/j.resconrec.2015.02.004 [https://www.academia.edu/11229348/Polymer_recycling_codes_for_distributed_manufacturing_with_3-D_printers open access]
+* Bas Wijnen, Emily E. Petersen, Emily J. Hunt, and Joshua M. Pearce. [https://www.academia.edu/28175221/Free_and_Open_Source_Automated_3-D_Microscope Free and Open Source Automated 3-D Microscope]. Journal of Microscopy 264(2), 238-246 (2016).
+* "Open Source Syringe Pump", ''D80 Conference''. Houghton, MI, October 2014
-'''Automated Microscope Stage'''
+=== MY 4777 Projects ===
-[http://www.appropedia.org/Automated_microscope_stage_literature_review| Lit Review]
+* Built MTU Delta 3D-Printer
+* [http://www.thingiverse.com/thing:494165 Rockwall Project]
-==Publications==
+* Celtic Mashup Project: [https://www.youmagine.com/designs/celtic-lamp-base YouMagine Page] and [[MY4777 celtic mashup project|Project Page]]
-{| class="wikitable"
-|-
-! Project
-! Description
-! Publication
-|-
-| Open Source Syringe Pump
-| Working with open-source hardware and 3D printing, we made an open source syringe pump that is cheaper and works just as well, if not better than the more expensive commercial pumps.
-| TBA
-|}
-[[category:MOST users]]