Name |
Price |
Description |
Flowrate |
Force |
Additional Specs |
Website
|
Sono Tek Syringe Pump |
$1,800 |
Accepts up to 2 of the same types of syringes, capacity range from 10μ to 60mL. Also has additional valving that can set up the pump to fill the syringe. |
Minimum: .001 mL/min Maximum: 30 mL/min |
N/A |
*single shot and continuous flow operations |
[1]
|
GenieTouch Syringe Pump |
$675 |
The pump always knows how much is left in the syringe and how much the handle can be pushed down. Accuracy is based on carraige position detection, which is +/- 0.2mm. |
Minimum: .001 μL/hr Maximum: 220.82 mL/min |
Maximum: 196.13 N |
*auto positioning/stalling detection *multi-directional left or right application |
[2]
|
NE-4000 Programmable Double Syringe Pump |
$928 |
Dual pump system allows for continuous infusion or emulsification. Network, control, and monitor up to 100 pumps with one computer. |
Maximum: 102 mL/min |
Maximum: 444.82 N (at min speed) or 444.82 N(at max speed) |
*Dispensing accuracy of +/-1% *Max pumping rate: 6120 mL/hr with a B-D 60 cc syringe *Syringe inside diameter range: 0.100 to 50.00 mm |
[3] [4]
|
NE-300 "Just Infusion" Syringe Pump |
$260 |
|
Maximum: 25 mL/min |
N/A |
*up to 60mL syringes *infusion rate can be changed while pumping *INFUSES ONLY |
[5]
|
Fusion Touch 400 Syringe Pump |
$1,350 |
From Chemyx, and can run on select versions of Windows, Mac and Linux. |
Minimum: 2pL/min (0.5 μL syringe Maximum: 10 mL/min (10 mL syringe) |
Maximum: 222.41 N |
*Step Resolution is 0.016 microns *Accuracy ± 0.35% *Reproducibility ± 0.05% |
[6]
|
Cole-Parmer Dual Syringe Infusion Pump |
$2,606 |
|
Minimum: 0.001 μL/hr Maximum: 147 mL/min |
Maximum: 275.79 kPa |
*Accepts 10 µL to 140 mL syringes *Reproducibility ± 0.2% *Accuracy ± 0.5% *Power: 115 VAC |
[7]
|
402 Syringe Pump from Gilson Inc. |
$5000-5500 |
Assures accuracy in sample transfer, dilution, reagent addition, mixing and more. Offers speed and reliability for repetitive liquid handling tasks. |
Minimum: 1 µL/min Maximum: 120 mL/min |
Maximum: 0.8 MPa(0.1 - 10-mL syringe) to 0.3 MPa(25-mL syringe) |
*Accuracy: 98.2% at 10 µL *Reproducibility: 0.8% at 10 µL *Injection Volume: 1.0 µL–25 mL |
[8]
|
Parker Smart Syringe Pump |
TBA |
The Parker Smart Syringe Pump is a long life, high precision pump which allows direct mounting at the point of dispense eliminating the need for a transfer line. |
Minimum: 7.5 nL/sec |
Maximum: 199.95 kPa |
*Accuracy: +/- 1% *Precision: <0.1% CV *Resolution: 228,495 steps |
[9]
|
Cole-Parmer Continuous Flow Syringe Pump |
$3,947 |
Hold up to four syringes to cycle continuously back and forth in a push-pull action. As two syringes are infusing, two syringes are withdrawing at the same rate. |
Minimum: 2.757 μL/hr Maximum: 70.56 mL/min |
Maximum: 177.93 N |
*Syringe size: 4-10uL to 60 mL *Reproducibility: +/- 0.1% *Accuracy: +/- <1% |
[10]
|
B.Braun/McGaw BD 360 Syringe Pump |
$435 |
Can be used as primary infusor or can deliver downstream secondary piggyback infusions. |
Maximum: 360mL/hr |
-- |
*Delivery Time: 10 - 60 min. in 2.5 min. increments *Accuracy: ± 3% * |
[11]
|
Fisher Scientific™ Single Syringe Pump |
$1,509 |
Applications: Calibrating, diluting, dispensing, dosing, emulsifying, fluid transfer, infusions |
Maximum: 519 mL/hr |
-- |
*Dispensing Volume: 10μL to 60mL *Auto shut off volume dispense mode |
[12]
|
Advanced Syringe Pump with Computer Control from Med Associates Inc. |
$1343.34 |
The PHM-111EC is controlled by an internal computer so that exact infusion rates can be set. Front panel switches allow for a simple setup, thus avoiding complicated menus or charts. |
Minimum: .025mL/hr Maximum: 430mL/hr (depending on the volume of the syringe) |
Minimum: 68.95 kPa Maximum: 413.685 kPa depending on the syringe) |
*Controls up to 16 pumps |
[13]
|