Get our free book (in Spanish or English) on rainwater now - To Catch the Rain.
Syringe pump literature review
|By Michigan Tech's Open Sustainability Technology Lab.
Wanted: Students to make a distributed future with solar-powered open-source 3-D printing.
Wouldn't it be great if there was a low cost high performance open source syringe pump? ....coming soon.
Commercial Syringe Pump Spec Sheet Comparison
|Sono Tek Syringe Pump||$1,800||Accepts up to 2 of the same types of syringes, capacity range from 10μ to 60mL. Also has additional valving that can set up the pump to fill the syringe.||Minimum: .001 m/min Maximum: 30 mL/min||N/A||*single shot and continuous flow operations|||
|GenieTouch Syringe Pump||$675||The pump always knows how much is left in the syringe and how much the handle can be pushed down. Accuracy is based on carraige position detection, which is +/- 0.2mm.||Minimum: .001 uL/hr Maximum: 220.82 mL/min||Maximum: 196.13 N||*auto positioning/stalling detection *multi-directional left or right application|||
|NE-4000 Programmable Double Syringe Pump||$928||Dual pump system allows for continuous infusion or emulsification. Network, control, and monitor up to 100 pumps with one computer.||Maximum: 102 mL/min||Maximum: 444.82 N (at min speed) or 444.82 N(at max speed)||*Dispensing accuracy of +/-1% *Max pumping rate: 6120 mL/hr with a B-D 60 cc syringe *Syringe inside diameter range: 0.100 to 50.00 mm|| |
|NE-300 "Just Infusion" Syringe Pump||$260||Maximum: 25 mL/min||N/A||*up to 60mL syringes *infusion rate can be changed while pumping *INFUSES ONLY|||
|Fusion Touch 400 Syringe Pump||$1,350||From Chemyx, and can run on select versions of Windows, Mac and Linux.||Minimum: 2pL/min (0.5 uL syringe Maximum: 10 mL/min (10 mL syringe)||Maximum: 222.41 N||*Step Resolution is 0.016 microns *Accuracy ± 0.35% *Reproducibility ± 0.05%|||
|Cole-Parmer Dual Syringe Infusion Pump||$2,606||Minimum: 0.001 uL/hr Maximum: 147 mL/min||Maximum: 40 psi||*Accepts 10 µL to 140 mL syringes *Reproducibility ± 0.2% *Accuracy ± 0.5% *Power: 115 VAC|||
|402 Syringe Pump from Gilson Inc.||$5000-5500||Assures accuracy in sample transfer, dilution, reagent addition, mixing and more. Offers speed and reliability for repetitive liquid handling tasks.||Minimum: 1 µL/min Maximum: 120 mL/min||Maximum: 0.8 MPa(0.1 - 10-mL syringe) to 0.3 MPa(25-mL syringe)||*Accuracy: 98.2% at 10 µL *Reproducibility: 0.8% at 10 µL *Injection Volume: 1.0 µL–25 mL|||
|Parker Smart Syringe Pump||TBA||The Parker Smart Syringe Pump is a long life, high precision pump which allows direct mounting at the point of dispense eliminating the need for a transfer line.||Minimum: 7.5 nL/sec||Maximum: 29 psi||*Accuracy: +/- 1% *Precision: <0.1% CV *Resolution: 228,495 steps|||
|Cole-Parmer Continuous Flow Syringe Pump||$3,947||Hold up to four syringes to cycle continuously back and forth in a push-pull action. As two syringes are infusing, two syringes are withdrawing at the same rate.||Minimum: 2.757 μl/hr Maximum: 70.56 ml/min||Maximum: 177.93 N||*Syringe size: 4-10uL to 60 mL *Reproducibility: +/- 0.1% *Accuracy: +/- <1%|||
|B.Braun/McGaw BD 360 Syringe Pump||$435||Can be used as primary infusor or can deliver downstream secondary piggyback infusions.||Maximum: 360mL/hr||--||*Delivery Time: 10 - 60 min. in 2.5 min. increments *Accuracy: ± 3% *|||
|Fisher Scientific™ Single Syringe Pump||$1,509||Applications: Calibrating, diluting, dispensing, dosing, emulsifying, fluid transfer, infusions||Maximum: 519 mL/hr||--||*Dispensing Volume: 10uL to 60mL *Auto shut off volume dispense mode|||
|Advanced Syringe Pump with Computer Control from Med Associates Inc.||$1343.34||The PHM-111EC is controlled by an internal computer so that exact infusion rates can be set. Front panel switches allow for a simple setup, thus avoiding complicated menus or charts.||Minimum: .025cc/hr Maximum: 430cc/hr (depending on the volume of the syringe)||Minimum: 10psi Maximum: 60psi depending on the syringe)||*Controls up to 16 pumps|||