Sophivorus (talk | contribs) |
No edit summary |
||
Line 11: | Line 11: | ||
|main-materials=Plastic | |main-materials=Plastic | ||
|estimated-cost-amount=1.13 | |estimated-cost-amount=1.13 | ||
|estimated-cost-currency=USD $ | |||
|sustainable-development-goal=Sustainable Development Goal 3, Sustainable Development Goal 8 | |sustainable-development-goal=Sustainable Development Goal 3, Sustainable Development Goal 8 | ||
|contact-affiliation=MOST | |contact-affiliation=MOST |
Revision as of 18:09, 15 October 2020
Stethoscope
Project developed by [Bwbarker]
Abstract
- The Stethoscope is one of the most basic medical tools. It allows a trained medical professional to diagnose issues with the heart and lungs. Stethoscopes come in a range of prices and quality, but all are breakable. This Stethoscope only requires some surgical tubing or similar airtight tubing and 3D printed parts.
Bill of Materials
- BOM
- 3D printer
- Filament
- STL and/or OpenScad files
- Surgical tubing
- 3D printer
Tools needed for fabrication of the OSAT
- MOST Delta RepRap or similar RepRap 3-D printer
- Knife or scissors
Skills and Knowledge Necessary to Make the OSAT
- No special skills needed to build, To use this device propertly takes some training.
Technical Specifications and Assembly Instructions
- There are 7 seperate prints for this device listed below with there print times (depending on your printer and settings)
- Bell
- Approximately 2 hours
- Y tubing joing
- Approximately 1/2 hour
- 2 small tubes
- Approximately 1 hour each
- Cross piece
- Approximately 3 hours
- 2 earpieces
- Approximately 4 hours each
- Bell
- Assembly time depends on how much post-printing corrections you need to do. Some filing or sanding may be necessary for a great fit.
Common Problems and Solutions
- For a really tight plastic on plastic fit, some sanding or filing will need to be done.
Cost savings
- Costs
- Plastic at $25 per kilogram, 45 grams, $1.13
- Rubber tubing $2.30 per foot, 2 feet, $4.60
- Commercial Equivelent
- Low cost - $7.99 - pedometerusa
- High cost - $75 - Littmann
- Savings between $2.26 and $69.27