Snap together shovel
Snap Together Shovel
Project developed by Cleyton
This shovel was designed to be a tool that can be fully modulated for the users current needs and environment. Shovels are used everywhere and are almost a necessity if moving large amounts of something dirt like. This shovel can be fully 3D printed if necessary. If the user has access to sticks or branches, the user can print off the wooden shaft attachments instead of the 3D printed shaft, saving time and money. If the user find a piece of scrap sheet metal, they can print off the sheet metal attachment instead of printing the blade, again saving time and money. The handle can either be a straight shaft, or an actual handle to help lift the material easier. Because it is designed with M16 screw/nuts, common parts can easily be substituted from a hardware store. It also does not need any additional hardware other than simple glue to help hold the parts that are printed in pieces.
Bill of Materials
- 3D Printer
- Upload and link to all source files from open source CAD
- Upload and link to all STLs
- Additional substitutions:
- Sheet metal blade
- wood shaft
Tools needed for fabrication of the OSAT
- MOST Delta RepRap or similar RepRap 3-D printer
- Glue or epoxy
Skills and Knowledge Necessary to Make the OSAT
- Operational knowledge of 3D Printer.
Technical Specifications and Assembly Instructions
- Provide directions for print/assembly - be detailed enough in your “how to” to ensure that someone could construct the device from your description. Consider the elegance of IKEA like instructions.
- Include print time estimate
- Include assembly time estimate
- Including drawings or pictures of the device at stage of assembly at minimum. (http://www.appropedia.org/Special:Upload)
Common Problems and Solutions
- When assembling blade and handle, ensure adequate drying time to provide optimal strength
- If your solution is not a low cost one then it is not really appropriate.
- Estimate your costs
- Find a commercial equivalent
- Calculate $ savings and % savings