Line 14: | Line 14: | ||
Franklin is installed on a Raspberry Pi and connected to the Prusa. The files for Franklin can be found [https://github.com/mtu-most/franklin here:]. How to install Franklin can be found [http://www.appropedia.org/Franklin:MOST here:] | Franklin is installed on a Raspberry Pi and connected to the Prusa. The files for Franklin can be found [https://github.com/mtu-most/franklin here:]. How to install Franklin can be found [http://www.appropedia.org/Franklin:MOST here:] | ||
=== | ===Printer Setup and Use=== | ||
==Designs== | ==Designs== | ||
To be added after paper submission | To be added after paper submission |
Revision as of 16:37, 13 June 2016
Template:Statusboxtop Template:Status-design Template:Boxbottom
Purpose
How to Operate
The following directions provide a step by step process for the use of a syringe pump attachment. The focus will be set up of the software, loading the pump, loading the syringe with the ink, zeroing the syringe tip, printing, and moving to idle.
Software Setup
Franklin is installed on a Raspberry Pi and connected to the Prusa. The files for Franklin can be found here:. How to install Franklin can be found here:
Printer Setup and Use
Designs
To be added after paper submission