Revision as of 14:50, 4 December 2014

Template:Statusboxtop Template:Status-design Template:Status-prototype You can help Appropedia by contributing to the next step in this OSAT's status. Template:Boxbottom

OSAT Wind Turbine Blade

Project developed by Lee Southerton - Lssouthe

Abstract

A Wind turbine bade
Picture of completed print using

Bill of Materials

PLA Plastic
Files can be found on at [[1]]

Tools needed for fabrication of the OSAT

MOST Delta RepRap or similar RepRap 3-D printer
Lighter

Skills and Knowledge Necessary to Make the OSAT

Knowledge how to operate a 3d printer

Technical Specifications and Assembly Instructions

Common Problems and Solutions

Rough edges can be smoothed out with lighter.

</nowiki>

@@ Line 7: / Line 7: @@
 {{777}}
-=OSAT Wind Turbine=
+=OSAT Wind Turbine Blade=
   Project developed by Lee Southerton - [[User:Lssouthe|Lssouthe]]
-                      Keith Southerton
 ==Abstract==
-# Paragraph description of the OSAT - why is it Appropriate? What need does it fulfil? Are there case studies you have found of a technology being used successfully?
+#A Wind turbine bade
-# Picture of completed print using [[image:name-of-your-image.png|500px|right]]
+# Picture of completed print using [[Image:Blade.jpg|500px|right]]
 == Bill of Materials==
-# Provide a full BOM -- Materials needed for fabrication of device and alternative materials if they are not available, prices/sources of non-printable parts
+# PLA Plastic
-## Upload and link to all source files
+# Files can be found on at [[http://www.thingiverse.com/thing:577603]]
-## Upload and link to all STLs
 == Tools needed for fabrication of the OSAT==
 # [[Delta_Build_Overview:MOST| MOST Delta RepRap]] or similar RepRap 3-D printer
-#
+#Lighter
 == Skills and Knowledge Necessary to Make the OSAT ==
-* If you used special skill – link to relevant wikipedia or wikiversity articles/courses
+* Knowledge how to operate a 3d printer
 == Technical Specifications and Assembly Instructions==
-# Provide directions for print/assembly - be detailed enough in your “how to” to ensure that someone could construct the device from your description. Consider the elegance of IKEA like instructions.
+#
-# Include print time estimate
-# Include assembly time estimate
-# Including drawings or pictures of the device at stage of assembly at minimum. (http://www.appropedia.org/Special:Upload)
-# Consider video if appropriate
-{|style="border:1px solid #73BF73; background-color: #E6FFE6; margin-left:.1em; margin-top:2px; -moz-border-radius:15px;" align="right" width="150px"
-!<big>Example video summary of textbook</big>
-|-
-|<center>{{#widget:YouTube|id=yiJDx9dCfEQ}} </center>
-|-
-|}
 === Common Problems and Solutions===
-* Include common mistakes/problems to avoid in building your OSAT and how to overcome them
+* Rough edges can be smoothed out with lighter
-== Cost savings==
-* If your solution is not a low cost one then it is not really appropriate.
-# Estimate your costs
-# Find a commercial equivalent
-# Calculate $ savings and % savings
-==References==
-* The sources of information (e.g. engineering handbooks, journal articles, government documents, webpages, books, magazine articles etc.). References should use the <nowiki> <ref> </ref> and <references/>  </nowiki>tags and can be in any format but should include all the information necessary for someone else to find the same information you did. For example: <ref> web page: Department of Energy (DOE) Landscaping and Energy Efficiency, DOE/GO-10095 (1995) Available: http://www.eren.doe.gov/erec/factsheets/landscape.html</ref>
-<references/>
-<nowiki>
-Based on the developmental needs addressed (e.g. food, heat, electricity, clean water, health  care, etc.) be sure to label your device in the proper categories e.g. use [[Category:Water]]. Be sure to categorize your device so that it will be easy to find – for example “Low voltage connection basics” is categorized in
 [[Category:How tos]]

OSAT Wind Turbine: Difference between revisions

Revision as of 14:50, 4 December 2014

Contents

OSAT Wind Turbine Blade

Abstract

Bill of Materials

Tools needed for fabrication of the OSAT

Skills and Knowledge Necessary to Make the OSAT

Technical Specifications and Assembly Instructions

Common Problems and Solutions