J.M.Pearce (talk | contribs) mNo edit summary |
J.M.Pearce (talk | contribs) |
||
| Line 11: | Line 11: | ||
==Operating Instructions on a MOST Delta== | ==Operating Instructions on a MOST Delta== | ||
* Tested with Maxpower 333605 Residential Grade Round .105-Inch Trimmer Line 690-Foot Length from [http://www.amazon.com/dp/B001BKZT1S/ref=pe_175190_21431760_M2T1_SC_dp_1 Amazon] for $24.35/3 pounds (1.3kg) so $18.73/kg | |||
To print in nylon using weed wacker filament do the following: | |||
==See also== | ==See also== | ||
Revision as of 10:51, 23 October 2015
BOM
- Lulzbot hexagon hotend $70 https://www.lulzbot.com/products/lulzbot-hexagon-hot-end
OpenSCAD design
- OpenSCAD
- STL
Build Instructions
Operating Instructions on a MOST Delta
- Tested with Maxpower 333605 Residential Grade Round .105-Inch Trimmer Line 690-Foot Length from Amazon for $24.35/3 pounds (1.3kg) so $18.73/kg
To print in nylon using weed wacker filament do the following: