Template:Statusboxtop Template:Status-design Template:Status-prototype You can help Appropedia by contributing to the next step in this OSAT's status. Template:Boxbottom
MOST Delta Auto Bed Leveling
Project developed by Erik Wachlin and Lee Southerton
Abstract
Bed leveling is a pain for delta style printers. It is not intuitive, and therefore takes a long time to do. With the addition of this auto leveling system your prints will be much better quality and leveling will take next to no time.
Bill of Materials
Part | Supplier | Part # | Cost/Part | # of Parts | Total |
---|---|---|---|---|---|
M4 9mm long bolts | McMaster | 90128A212 | $0.07 | 1 | $0.07 |
M3 25mm long bolt | McMaster | 91292A020 | $0.06 | 2 | $0.13 |
Micro Limit Switch | Amazon | a13111300ux0087 | $1.12 | 1 | $1.12 |
Tools needed for fabrication of the OSAT
- MOST Delta RepRap or similar RepRap 3-D printer
- Philips head Screwdriver