Sophivorus (talk | contribs) m (Text replacement - "{{OpenKnowHowManifest" to "{{Device") |
mNo edit summary |
||
Line 15: | Line 15: | ||
|manifest-language=eng | |manifest-language=eng | ||
|documentation-language=English | |documentation-language=English | ||
|countries-of-design=Category:United States | |||
|main-materials=Plastic | |main-materials=Plastic | ||
|sustainable-development-goal=Sustainable Development Goal 10, Sustainable Development Goal 11 | |sustainable-development-goal=Sustainable Development Goal 10, Sustainable Development Goal 11 |
Revision as of 12:03, 17 September 2020
Open Source Composting Toilet Hinge
Project developed by User:Tazmanian60
Template:Statusboxtop Template:Status-design Template:Status-prototype You can help Appropedia by contributing to the next step in this OSAT's status. Template:Boxbottom
Abstract
Toilet seats and hinges are an overlooked item in the modern world. A proper seat and hinge provides support for when nature calls. This item may be used in a composting toilet aplication.
- Picture of completed print using
Bill of Materials
- Plastic for the print
- Screw
- Nut
The link for the OpenScad files as well as the STL can be found here: [1]
Tools needed for fabrication of the OSAT
- MOST Delta RepRap or similar RepRap 3-D printer
- Screwdriver (sized for the screw)
Skills and Knowledge Necessary to Make the OSAT
- No extra skills necessary
Technical Specifications and Assembly Instructions
- Print the parts
- Scrape plastic off
- Screw the bolt through the holes of the hinge
- Place nut over bolt
Common Problems and Solutions
- Problems printing round parts of hinge
- Change print quality
Cost savings
- If your solution is not a low cost one then it is not really appropriate.
- $2 in plastic, $0.10 bolt, $0.05 nut
- A commercial equivalent can be found at: Toilet Hinge
- $7.90 Savings or 74.7%