Prusa i3 MK3S LCD Assembly
Procedure
[edit | edit source]The following steps differ from the normal Prusa directions.
- Step 3 - Checking the LCD cables
- If your LCD cables are unmarked, you should mark them to match the Prusa directions. This way the cables can be easily identified later on.
- Mark the cable you connect to EXP1 with one stripe on both ends cable
- Mark the cable you connect to EXP2 with two stripes on both ends of the cable
- If your LCD cables are unmarked, you should mark them to match the Prusa directions. This way the cables can be easily identified later on.
- Step 12 - Different PSU types
- Follow the silver (new) PSU directions.
Navigation
[edit | edit source]| Prusa i3 MK3S Home Page |
| Assembly |
| Before You Start |
| Y-Axis Assembly |
| X-Axis Assembly |
| Z-Axis Assembly |
| E-Axis Assembly |
| LCD Assembly |
| Heated Bed & PSU Assembly |
| Electronics Assembly |
| Authors | |
|---|---|
| License | CC-BY-SA-3.0 |
| Cite as | Swflynn (2019–2025). "Prusa i3 MK3S LCD Assembly". Appropedia. Retrieved June 4, 2026. |