Home Composting is not a new technology and it has been practiced for many years around the world, as a simple and low cost solution to manage household organic waste at source. In Sri Lanka, different set-ups of household composting units can be found and it has been more popularised in some areas. Compost offers several benefits such as enhanced soil fertility and soil health-thereby increased agricultural productivity, improved soil biodiversity, reduced ecological risks and a better environment.
Home composting is now being encouraged as a means of reducing the organic waste being discarded and sent to the landfills. In Sri Lanka, organic fraction of Municipal Solid Waste (MSW) contributes 70 - 90% of total waste stream in many municipalities. These organic substances are bulky to handle and contributes for numerous liquid and gaseous emissions that deteriorate dumpsite environments. A good home composting programmes can significantly reduce the quantity of organic waste adding to the mainstream (>50%) and subsequent emissions upon final disposal. Valuable products (compost) are produced while reducing the costs incurred for collection, transportation and final disposal at dumpsite.
Community participation has been a vital component in most successful integrated solid waste management (ISWM) programmes. Home composting encourages the community involvement on waste management activities and it facilitates easy transferring of source separation concepts to the people. Home based composting compared to the compost produced from mixed waste is of high quality as the waste does not get contaminated with hazardous materials. The separated inorganic materials need less effort for cleaning before recycling. Therefore, household composting has been identified as an option to enhance the economic conditions of urban poor people through home-gardening and selling of compost and/or recyclables.
There are various technical options available as household level composting systems that vary from simple pit /heap methods to complex bin or rotating drum designs. Traditional composting methods (pit, heap, Jeewakotu) have been common practices in many rural/ peri-urban areas with different kinds of organic matters. Most urban dwellers prefer bin composting system due to its convenience and as it has less impact an aestheticism with their very limited space.
The Composting Process[edit | edit source]
Composting is a natural biological process that carried out under controlled aerobic (requires oxygen) or anaerobic conditions. Anaerobic composting is not common due to its slow degradation rate and odorous intermediate products. Aerobic composting is widely used and in this process, various microorganisms, including bacteria and fungi, break down organic matter into simpler substances. The effectiveness of the composting process is dependent upon the environmental conditions present within the composting system i.e. oxygen, temperature, moisture, material disturbance, substrate conditions.
The essential elements required by the composting microorganisms are Carbon, Nitrogen (represent by C: N ratio), Oxygen and Moisture. If any of these elements are lacking, or if they are not provided in the proper proportion, the microorganisms will not flourish and will not provide adequate heat. A composting process that operates at optimum performance will convert organic matter into stable compost that is odour and pathogen free, and a poor breeding substrate for flies. In addition, it will significantly reduce the volume and weight of organic waste as the composting process converts much of the biodegradable component to gaseous carbon dioxide and water. Composting is relatively simple to manage and can be carried out on a wide range of scales in almost any indoor or outdoor environment and in almost any geographic location. It has the potential to manage most of the organic material in the waste stream including kitchen waste, leaves and yard wastes, farm waste, animal manure, paper products, sewage sludge etc.
So composting has been a vital component in many integrated waste management plans that is developing worldwide.
Optimum conditions for composting[edit | edit source]
Oxygen / aeration
If there is insufficient oxygen, a different set of anaerobic microorganism dominates the degradation process and produce odorous intermediate products such as methane, organic acids and hydrogen sulphide. A constant supply of oxygen will give the aerobic microorganisms an advantage over the anaerobic micro-organisms. Approximately a 5% minimum concentration of oxygen is required within the pore spaces in the media. Aeration is the process of providing oxygen into the composting material. This will also provide a platform to remove water vapour, gases and excess heat trapped within the material. Aeration is common practice with high rate large scale composting facilities.
Moisture content
Moisture supports the metabolic processes of the micro-organisms. Water is the medium for chemical reactions. Biological activity ceases below 15% moisture content and in theory activity is optimal when materials are saturated. Generally moisture content of between 40% and 65% should be maintained. At moisture content of below 40%, micro-organism activity will continue but at a slower rate and above 65% water will displace much of the air in the pore spaces of the composting material. This will limit the movement of air and lead to anaerobic conditions.
Temperature
Composting takes place within two temperature ranges known as mesophilic (10.0 – 40.0 C) and thermophilic (over 42.0C). It is generally accepted that maintaining temperatures between 43.0C and 65.0C allows for effective composting. The thermophilic temperatures are favoured in the composting materials, because they destroy more pathogens, weed seeds and fly larvae. In some composting processes, Temperatures can continue to rise above 70.0C due to insulation effects and on-going microbial activity. At these temperatures many micro-organisms die or become dormant and the process effectively stops until the micro-organisms can recover.
Nutrients and the Carbon Nitrogen (C:N) ratio
The microbes involved in composting use carbon for energy and nitrogen for proteinsynthesis. The proportion of these two elements required by the microbes averages about 30 parts carbon to 1 part nitrogen. Accordingly, the ideal ratio of Carbon to Nitrogen (C: N) is 30 to 1 (measured on a dry weight basis). This ratio governs the speed at which the microbes decompose organic waste. Most organic materials do not have this ratio and, to accelerate the composting process, it may be necessary to balance the numbers by mixing different substrates. (eg.. kitchen waste is rich in nitrogen while garden waste is in poor)
Particle size, porosity, structure and texture
The ideal particle size is around 2 to 3 inches. In some cases, such as in the composting of kitchen waste, the raw material may be too dense to permit adequate air flow or may be too moist. A common solution to this problem is to add a bulking agent (straw, dry leaves) to allow for proper air flow. Mixing materials of different sizes and textures also helps aeration the compost pile.
(a) Home composting methods[edit | edit source]
Large scale, commercialised composting facilities (Ex. Windrows, Static piles and Reactor systems) use sophisticated technologies and equipments to handle the composting process. Home composting depends on traditional or small scale simplified composting technologies at low cost. (Ex. simple pit method, heap method, bins, rotating drums). But each method uses the same scientific principle though it differs in procedures and equipments used. Appropriate/most suitable home composting systems may differ from place to place depending on, climate conditions, economic conditions and social factors of the people. In Sri Lanka, space limitation has been a critical issue for many local authorities that have crippled the implementation of home composting programmes.
Most common home composting systems in Sri Lanka[edit | edit source]
- Heap method
- Pit method
- Traditional Jeewakotu and basket methods
- Rotating drums
- Composting bin systems
Composting Bin System[edit | edit source]
Bin composting is the most popular and advanced version of home composting system that overcomes problems experienced in other composting systems. There are different types of bins available for home composting and generally it varies from 200- 300L in size. These are from different materials such as cement/concrete, plastic, metal, etc. The bins allow higher stacking of composting materials and better use of floor space than free-standing piles. Bins can also eliminate weather problems and reduce problems of odours, and provide better temperature control. At present, most bins are designed to suit the urban landscape as well.
As mentioned before, composting bins are popular in urban areas with emerging solid waste disposal problems and therefore, it is important to give proper guidance to the community in using composting bins. It is identified that some technical and management problems have been the main constraints in popularising the composting bin among citizens.
The quality of the compost[edit | edit source]
The following features are visible when the compositing is completed in a proper manner. Good quality control programme is required if it is intended to market or commercialise the product, targeting the large scale agricultural systems (especially for organic farming). . • Dark brown to black in colour. . • Practically insoluble in water. . • Has a C/N Ratio ranging from 10 to 20. . • Has a beneficial effect both on the soil and the growing crops.
- Free from weed seeds and pathogens. But precaution is necessary when using compost produced from mixed garbage. This compost may be contaminated with,
. • Heavy metals of Arsenic, Lead, Cadmium and mercury are extremely harmful to both humans and domestic animals. . • Pathogens of diseases of Enteritis, Tuberculosis etc. Pathogens could be found in city wastes since their thermal death points are specific, care should be taken to allow the heating up of heaps.
Use of made compost[edit | edit source]
Compost is more important as a soil conditioner rather than a nutrient supplier. It improves the soil chemical, physical and biological parameters so that it provides a better environment for plant growth. This compost can be used as;
- Mulch: spread a layer of compost 1-3 inches thick around the plants and over bare soil to prevent soil erosion, conserve water and control weed growth.
- Soil conditioner: mix about 4-5 inches of compost into soil when start a nursery, vegetable garden or plant new trees.
- Potting mixture: screen the compost through a ¼ inch mesh. Mix 2 parts of compost with 1 part of sand and 1 part of top soil and use as a potting mixture for plants.
Recommendation for design improvement[edit | edit source]
A) Material of the bin
- Metal composting bins are not suitable due to high corroding problems. The economic benefit of the concrete composting bin is higher than the metal bin due to longer life span. Plastic bins are convenient to use but cost is high compared to other designs and it does not give a good protection especially against the rodents.
B) Design modification in concrete bin
- Design modifications were done with considering the scientific requirement of the composting process and practical problems experienced by the users.
When bin designs were identified at the beginning, it did not include aeration holes in the bottom ring. Aeration is a critical factor for composting process and as a result, delayed composting and bad odour were identified
The bin modified by Practical Action includes the following features[edit | edit source]
- To improve the aeration, the modified bin was designed with more aeration holes. 70-100 holes included in each ring and the diameter of these holes was less than 1 cm (the minimise pest entering).
- Previous bin designs included only one door of 10"x3.5" for compost removing purposes.As people encountered difficulties in compost removing, the new bin was designed with three compost removing doors of 10"x3.5".
- Some designs included a bottom pad which enabled the bin to stand steadily and prevent rats entering. But, it was not porous enough to drain excess moisture. Therefore, the new design included a permeable pad with 5-10 holes of ½" size to enable draining of excess water. Further, it facilitates entering of soil micro organism to the composting process.
- Design Improvements for a solid lid is important for easy handling and to prevent pests entering. Prior to the solids lids, there were galvanized lids that were of light weight. These lids did not cover the bins properly as they were not steady. Therefore, a thin 9 concrete lid was designed to cover the bin well so that the lid would not fall off. As these concrete lids are solid, it keeps away from pest and prevents any rain water entering.
- In the new design, all breakable components are reinforced with irons which help to withstand under rough handling. Therefore, it gives extra strength to the new bin with three compost removing doors.
- Rats entering the bin was a major problem that was encountered before in earlier designs with poorly fitted doors. The modified design includes a simple locking system to keep the bin door tightly closed to prevent any pests entering the bin.
- In the new design, each ring is well fitted with interlocking groves. This minimizes displacing rings with mixing and other management activities. It also keeps minimum space to protect from snails and cockroaches.
References and further reading[edit | edit source]
www.epa.gov/epaoswer/non-hw/composting
www.dep.state.pa.us/dep/deputate/airwaste/wm/recycle/compost/Home1.htm www.montgomerycountymd.gov/deptmpl.asp?url=/content/dep/composting/home.asp
www.ci.seattle.wa.us/util/compsting
SLS Standards for composting quality (SLS 1246:2003)
Who to contact:
Project Manager – Housing or the Resource Desk at:
Practical Action South Asia
No 5, Lionel Edirisinghe Mw, Colombo 5, Sri Lanka
Tel: +94 (11) 282 9412
Fax: +94 (11) 285 6188
E-mail: general@practicalaction.lk
Web: www.practicalaction.org
For specific training details please contact the Project Officer at Practical Action:
Hambantota (Tel: 047-4379339
E-mail: southern.staff@itdg.slt.lk)
Ampara (Tel: 063-2224932
E-mail: eastern.staff@itdg.slt.lk)