Lasersaur Rebuild to Orginal

From Appropedia
Jump to navigation Jump to search
The Open Source Hardware Enterprise from Michigan Technological University is working on a Lasersaur.

Project developed by Chase Carpenter,

Objective[edit | edit source]

The goal of this project is to rebuild the Michigan Tech OSHE Lasersaur and create a Standard Operating Procedure for it.

Background[edit | edit source]

The Michigan Tech OSHE's Lasersaur has been out of commission for quite some time now and was due for a renewal using concepts from other open source projects like the MPCNC our goal was to rebuild, calibrate, and get out old open source laser cutter working again.


Problem Statement[edit | edit source]

Project Significance[edit | edit source]

Project Goals: Rebuild, calibrate and develop an SOP for our enterprises laser cutter

Future Goals: Increase safety and reliability of the lasersaur operation


Bill of Materials[edit | edit source]

Tools needed[edit | edit source]

Technical Specifications and Assembly Instructions[edit | edit source]

References[edit | edit source]