{"id":80150,"key":"Lasersaur_Rebuild_to_Orginal","title":"Lasersaur Rebuild to Orginal","latest":{"id":1205987,"timestamp":"2025-11-27T19:18:44Z"},"content_model":"wikitext","license":{"url":"https://www.appropedia.org/Appropedia:Copyrights","title":"CC-BY-SA-4.0"},"source":"{{Project data\n| authors = User:ChaseCarpenter\n| status = Designed\n| location = Michigan, USA\n}}\n\n''The Open Source Hardware Enterprise from Michigan Technological University is working on a Lasersaur. ''\n\nThe goal of this project is to rebuild the Michigan Tech OSHE Lasersaur and create a Standard Operating Procedure for it.\n\n== Background ==\n\nThe Michigan Tech OSHE's Lasersaur has been out of commission for quite some time now and was due for a renewal using concepts from other open source projects like the MPCNC our goal was to rebuild, calibrate, and get out old open source laser cutter working again.\n\n== Problem Statement ==\n\n== Project Significance ==\n\n'''Project Goals:'''\nRebuild, calibrate and develop an SOP for our enterprises laser cutter\n\n'''Future Goals:'''\nIncrease safety and reliability of the lasersaur operation\n\n== Bill of Materials ==\n\n== Tools needed ==\n\n== Technical Specifications and Assembly Instructions ==\n\n== References ==\n\n<references />\n\n{{Page data\n| license = CC-BY-SA-3.0\n| authors = User:Ejumlor, User:ChaseCarpenter\n| published = 2019\n}}\n\n[[Category:OSHE]]"}