User:Klbarie

537203 10200233780717239 1115786895 n.jpg

Kyle BarieEdit

  • Note: This page is a work in progress. Not all information and content has been uploaded. Please stay tuned.


BioEdit

I am a sixth year student studying Mechanical Engineering with a minor in Manufacturing at Michigan Technological University. I plan to graduate in the Spring of 2016. I am currently enrolled in the Open Source 3D Printing Class where I am learning how to build and manipulate my very own 3D printer as well as learn about the open source community as a whole. I am also involved in the Consumer Product Manufacturing Enterprise where we strive to exceed expectations of company sponsors, improve the lives of consumers through innovation giving us hands-on experience at identifying and solving real-world engineering problems by developing and applying technical, professional and entrepreneurial skills. Working with the Hops Dryer Development Team we aim to create an affordable solution to small scale hops farmers to create more high quality hops for the expanding craft brewing industry.

I have learned that every success and failure can be used as an opportunity to learn and better yourself, which I take advantage of as often as possible. I am always asking questions, and learning everything I can.


Professional ProjectsEdit

PROFIL System Inc.: May 2016 - PresentEdit


PROFIL Logo.png


Tool Design EngineerEdit

[[Image:|center|border|256x192px|alt=| ]]
[[Image:|center|border|256x192px|alt=| ]]



Consumer Product Manufacturing Enterprise: September 2013 - April 2016Edit


CPME.png


Hops Dryer DevelopmentEdit

NanoMAGEdit

Magna Seating Systems May 2015 - August 2015Edit


Magna.jpg

At Magna, as an Engineering Intern, I worked in the Advanced Engineering department to provide technical and engineering support for Core Product development.

Recliner Disc AnalysisEdit

Tyco Fire Protection Products: June 2014 - December 2014Edit


TycoFPP.jpg

At Tyco, as a Manufacturing Engineering Intern, I worked to improve production efficiency across the plant by designing and planning machine additions in coordination with the machine operators.

Powder Paint Line Loading PlatformEdit

My main focus at Tyco, was to assist in the implementation of a new overhead I-beam conveyor powder paint line. This line included an inline media blaster, two Wagner automatic paint booths, a manual paint booth, a prime oven, and a curing oven.

Specific projects include:

  • Developed a large standing platform for operators to work from.
  • Created material transfer fixtures to avoid interfering with the conveyor line.
  • Conducted FMEA on the line to identify potential failures and how they could be avoided.

Sheet Metal Stacker AutomationEdit

A large sheet metal blaster had a stacking system engineered by the company that manufactured the system. Unfortunately the cart that the plates stacked on became too heavy when fully loaded to move out of the guarding by hand as designed. Due to this, I was tasked with creating a solution.

After reading an old book on pneumatic design, I designed a pnuematic system that would extend and retract this cart, while purging all pressure when the lever is released. This added feature was a safety feature to ensure that if a forklift hit the cart when unloading the sheets, it would not damage the air cylinders.

Robotic Systems Enterprise: September 2010 – May 2013Edit


RSE.png

Electronic Broomball ScoreboardsEdit

Mechanically completed scoreboards  

Local FIRST Robotics Teams MentorEdit

Team 3771Edit
The Yooper Troopers' robot in action  
Team 4363Edit

Personal ProjectsEdit

Athena Delta 3D Printer BuildEdit


Kyle's Athena Delta Electronics  

Athena 24V Round Heated BedEdit


Relay used to control heated bed  

1993 Jeep Cherokee XJEdit


Owning a vehicle that is as old as you has serious drawbacks. Especially when you live in Michigan. This has lead to a series of projects to upkeep and repair my Jeep.

New Floor BoardsEdit

Due to the harsh winters and salted roads of Michigan, the Jeep's floorboards were completely rusted out. Over the course of 3 weeks, I removed the interior, and cut out the rusted portions with an angle grinder. I then cut and folded sheet steel to fit into the large holes in my flooring. The replacement flooring was held in place by 1/8" stainless steel pop rivets, and sealed with adhesive caulk. Everything was then coated in a heavy dose of Rust-Oleum paint and Undercoating.

Partial Floorboards removed in floorboard replacement  

Rear Quarter Panel Rust RepairEdit

Pre-Rust Repair  

New U-JointsEdit

Old U-Joints  
Replaced U-Joints  

Front Bumper RepairEdit

Fender Bender Damage  
Repaired Front Bumper  

New Wheel Hub Bearings and BrakesEdit

Front Wheels Removed  
Rear Wheels Removed  
Bending Breaker Bar Trying to Remove Nut  
Broke 1/2" Breaker Bar  
New Vs. Old Wheel Hub Bearing  
Hub Before Cleaning  
Hub After Cleaning  

Supernatural LampEdit


Kyle's Supernatural Themed Lamp  
Kyle's Supernatural Themed Lamp Turned On  
Kyle's Supernatural Themed Lamp Detail  

Gaming PC BuildEdit


Kyle's Gaming PC in the Dark  
Kyle's Gaming PC  


Picture galleryEdit

3D Prints
Kyle's Rock Wall Hold  
Simple Filament Spool Stand V3.2 by FablabMoebius: http://www.thingiverse.com/thing:296971  
Kyle's Dual Headphone Stand: http://www.thingiverse.com/thing:1087825  
Elephant found on #Thingiverse http://www.thingiverse.com/thing:257911  
Prototype Disc for Justin Henker's Senior Design  


UserboxesEdit

Klbarie (talk) 12:03, 28 January 2016 (PST)

Userboxes
Oshw-logo.png This user is a member with interest and knowledge of Open Source Hardware.
Reprap.png This user is a member with an interest and knowledge of 3-D printing.