Get our free book (in Spanish or English) on rainwater now - To Catch the Rain.

Difference between revisions of "Super Bainite METHODS"

From Appropedia
Jump to: navigation, search
(FOR THIS SUMMER)
(FOR THIS SUMMER)
Line 26: Line 26:
  
 
====<font color="red">FOR THIS SUMMER</font>====
 
====<font color="red">FOR THIS SUMMER</font>====
  Remove capsule from furnace.  
+
  Remove capsule from furnace (#8, U208).  
 
  Quickly and carefully break the capsule and immediately quench the sample in water.  
 
  Quickly and carefully break the capsule and immediately quench the sample in water.  
 
  Rinse with ethanol and dry with air.  
 
  Rinse with ethanol and dry with air.  

Revision as of 10:49, 28 April 2017


Sunhusky.png By Michigan Tech's Open Sustainability Technology Lab.

Wanted: Students to make a distributed future with solar-powered open-source 3-D printing.
Contact Dr. Joshua Pearce - Apply here

MOST: Projects & Publications, Methods, Lit. reviews, People, Sponsors, News
Updates: Twitter, Instagram, YouTube

OSL.jpg

Step 1: Print

Parameters (MTU CNC Metal Printer)
Spool Gun
Nozzle head needs to start 8-10mm away from the substrate
5V
Wire Speed ~22 (level on feeder)
RC25 gas @ 25 CFH
  • Pause in between layers to clean surface & allow to cool

Step 2: Machine

  • Remove part from substrate
  • Any further machining/finishing required to be at net shape

Step 3: Heat Treat

  1. Encapsulate the part in quartz and evacuate the capsule. DO NOT BREAK CAPSULE UNTIL ENTIRE HT IS FINISHED
  2. Homogenize in a high temperature furnace for 3 days at 1150C.
  3. Allow to slowly cool in air after homogenization.
  4. Austenitize at 1000C for 15 minutes
  5. Immediately turn furnace down to 125C after austenitization and let the sample gently transition to the lower temperature
  6. Cook the sample at 125C for 60 days
  7. Remove from furnace, break the capsule open and quench the sample in water.

FOR THIS SUMMER

Remove capsule from furnace (#8, U208). 
Quickly and carefully break the capsule and immediately quench the sample in water. 
Rinse with ethanol and dry with air. 
Place the sample on the first top cabinet on the right as you enter 517.
(Labeled Emily Hunt, Steel Samples)

Step 4: Characterize

  • Compression test
  • Hardness test
  • Metallography
  • SEM/XRD?