Get our free book (in Spanish or English) on rainwater now - To Catch the Rain.

Difference between revisions of "Snap together shovel"

From Appropedia
Jump to: navigation, search
(Abstract)
(Skills and Knowledge Necessary to Make the OSAT)
Line 27: Line 27:
  
  
== Skills and Knowledge Necessary to Make the OSAT ==
+
== Components Designed for Shovel ==
* Operational knowledge of 3D Printer.
+
#link all parts here.
  
 
== Technical Specifications and Assembly Instructions==
 
== Technical Specifications and Assembly Instructions==

Revision as of 04:06, 7 December 2015

MOST Delta filament as guide.JPG This page was part of an MTU course MSE4777 OA and MSE4777 OB/MSE5777/EE4777/EE5777: Open-source 3-D printing

Please leave comments using the discussion tab. The course runs in the Fall semester. It is not open edit.


Snap Together Shovel

Project developed by Cleyton Cavallaro
Status
This OSAT has been designed but not yet tested - use at own risk.
This OSAT has been prototyped.

You can help Appropedia by contributing to the next step in this OSAT's status.

Abstract

This shovel was designed to be a tool that can be fully modulated for the users current needs and environment. Shovels are used everywhere and are almost a necessity if moving large amounts of something dirt like. This shovel can be fully 3D printed if necessary. If the user has access to sticks or branches, the user can print off the wooden shaft attachments instead of the 3D printed shaft, saving time and money. If the user find a piece of scrap sheet metal, they can print off the sheet metal attachment instead of printing the blade, again saving time and money. The handle can either be a straight shaft, or an actual handle to help lift the material easier. Because it is designed with M16 screw/nuts, common parts can easily be substituted from a hardware store. It also does not need any additional hardware other than simple glue to help hold the parts that are printed in pieces. This shovel can have multiple blade types designed to fit it. This can include, dirt blades, snow blades, and other things like rakes or hoes.

Image.png

Bill of Materials

  1. 3D Printer
    1. Upload and link to all source files from open source CAD
    2. Upload and link to all STLs
  2. Additional substitutions:
    1. Sheet metal blade
    2. wood shaft

Tools needed for fabrication of the OSAT

  1. MOST Delta RepRap or similar RepRap 3-D printer
  2. Glue or epoxy
  3. knife


Components Designed for Shovel

  1. link all parts here.

Technical Specifications and Assembly Instructions

  1. Provide directions for print/assembly - be detailed enough in your “how to” to ensure that someone could construct the device from your description. Consider the elegance of IKEA like instructions.
  2. Include print time estimate
  3. Include assembly time estimate
  4. Including drawings or pictures of the device at stage of assembly at minimum. (http://www.appropedia.org/Special:Upload)

Common Problems and Solutions

  • When assembling blade and handle, ensure adequate drying time to provide optimal strength

Cost savings

  1. ~ $11 when fully printed
    1. If wooden shaft and/or sheet metal blade are found (for free), cost is ~ $5
  2. Current shovels at Home Depot are ~$20. You would need two to be able to compare to the full modular abilities of the 3D printed shovel.
  3. Savings between $30 and $35 dollars. This is a 75% to 88% savings.