No edit summary |
|||
Line 15: | Line 15: | ||
Slic3r has many different settings, the ones that are changed the most often are: | Slic3r has many different settings, the ones that are changed the most often are: | ||
Under Print Settings | '''Under Print Settings ''' | ||
For a detailed description of all/most settings on this tab of Slic3r See: [http://richrap.blogspot.com/2012/01/slic3r-is-nicer-part-1-settings-and.html| Descriptions of Print Settings (1/3 way down page)] | |||
Layer height (mm): | Layer height (mm): | ||
Perimeters: | Perimeters: | ||
Solid layers: | Solid layers: | ||
Fill density: | Fill density: | ||
Fill angle: | Fill angle: | ||
Under Printer and Filament | '''Under Printer and Filament''' | ||
For a detailed description of all/most settings on this tab of Slic3r See:[http://richrap.blogspot.com/2012/01/slic3r-is-nicer-part-2-filament-and.html| Descriptions of Settings under Printer and Filament] | |||
Temperature/First Layer Temperature | Temperature/First Layer Temperature | ||
Bed Temperature/First Layer Bed Temperature | Bed Temperature/First Layer Bed Temperature | ||
Print speed: various settings.. | Print speed: various settings.. | ||
Travel (mm/s) | Travel (mm/s) | ||
=====Saving your file===== | =====Saving your file===== | ||
→ Click “File” | → Click “File” |
Revision as of 16:03, 26 September 2012
How to use the Reprap
(The two programs you need are in the upper right corner of the desktop)
Preparing your file for printing:
Open Slic3r72b → Set settings accordingly (fill, perimeters, etc) → Make sure the temperatures correspond to the material temperature settings described below.
Settings
Slic3r has many different settings, the ones that are changed the most often are:
Under Print Settings
For a detailed description of all/most settings on this tab of Slic3r See: Descriptions of Print Settings (1/3 way down page)
Layer height (mm):
Perimeters:
Solid layers:
Fill density:
Fill angle:
Under Printer and Filament
For a detailed description of all/most settings on this tab of Slic3r See:Descriptions of Settings under Printer and Filament
Temperature/First Layer Temperature
Bed Temperature/First Layer Bed Temperature
Print speed: various settings..
Travel (mm/s)
Saving your file
→ Click “File” → Select “Slice and Save As” (Opens window, should currently be in “reprap” folder)
The next step is to open your stl file. → Click “stl” folder → Choose your stl file → Click “Open”
It will now ask you to save as gcode. It is best to keep the naming consistent. → Click “reprap” folder → Click “gcode” folder → Click “Save”
Now it will process & say “....successfully sliced.....” → Click “OK”
You are now done with Slic3r. Each time you wish to change your settings, you most go through the steps above. *Please, always follow the saving methods above, as the computer can easily get cluttered when files are saved in the wrong folders.
Printing:
Plug in the Reprap (plug the cord into the back of the power box)
Open Pronterface
→ Click “Connect” (near top of screen)
Now you will choose temperature settings for your appropriate filament material. → If using PLA, choose PLA temperatures for heater & bed (185, 60) → Click “Set” next to heater & bed. → If using ABS, choose ABS temperatures for heater & bed (230, 110) → Click “Set” next to heater & bed. * Failure to set the temperature correctly can result in burnt plastic, not being melted enough, and several other issues with the printer, make sure you know your material before starting.
→ Click “Load File” → Click “reprap” folder → Click “gcode” folder → Click on your file → Click “Open” The screen on the right side will show you estimated duration in hr:min:sec, amount of filament used, etc.
→ Click “Check Temp” next to temperature settings to see what your current temperature is. *Bed temperature takes longer to heat than extruder, so it is better to set that one first.
→ Click “Print”
*If you have problems getting the first layer to stick, try cleaning the bed using ethanol & a cloth wipe. → Click “Pause” → Click “Z+ 10” → Click “Motors Off” → Adjust settings in Slic3r OR → Clean bed using ethanol & cloth wipe
*PLEASE! DO NOT adjust things on the actual reprap unless you know what you're doing.