We continue to develop resources related to the COVID-19 pandemic. See COVID-19 initiatives on Appropedia for more information.

Difference between revisions of "Quick Square"

From Appropedia
Jump to navigation Jump to search
Line 29: Line 29:
  
 
Example orientaion below:
 
Example orientaion below:
 
 
  
  

Revision as of 18:23, 4 December 2019

MOST Delta filament as guide.JPG This page was part of an MTU course MSE4777 OA and MSE4777 OB/MSE5777/EE4777/EE5777: Open-source 3-D printing

Please leave comments using the discussion tab. The course runs in the Fall semester. It is not open edit.


Quick Square

Project developed by User:Isac Bench
Status
This OSAT has been designed but not yet tested - use at own risk.
This OSAT has been prototyped.

You can help Appropedia by contributing to the next step in this OSAT's status.

Abstract

This quick square or carpenter's triangle is a product that can be found relatively cheap at most hardware stores. This product allows the user to make lines perpendicular or 45 degrees from an existing edge. The advantage of making this 3D printable is that it is cheaper and someone who does not have access to a hardware store may be able to obtain it if they have the capabilities to 3D print.

Tablesawstick.jpg

Bill of Materials

This part can be fully printed and no other components are necessary.

Click Here for STL and Source Code

Tools needed for fabrication of the OSAT

  1. MOST Delta RepRap or similar RepRap 3-D printer


Skills and Knowledge Necessary to Make the OSAT

None

Technical Specifications and Assembly Instructions

Place flat surface on bed and no support material will be needed.

Example orientaion below:




Printing / Slicing Settings

Temperature: 210C

Infill: 15%

Supports: No

Skirt: No

Speeds: Print: 90 mm/s, Wall Speed: 70 mm/s

Layer Height: 0.20 mm

Material: PLA

Cost savings

Estimated Cost in PLA: $0.58

Commercial Equivalent: Many varieties of commercial products here is a standard option [1]

Commercial equivalent for approx $10

3D Printed for $0.58

Cost Savings ~ $9.42

% Cost Savings ~ 94% Savings

Benefited Internet Communities

Woodworking Talk [2]

DIY Chatroom [3]

The Woodworking Patriot [4]


References

Carpenters Tools Websites