Salils.1807 (talk | contribs) mNo edit summary |
Kathy Nativi (talk | contribs) No edit summary |
||
Line 2: | Line 2: | ||
{{777}} | {{777}} | ||
<!--infobox--> | |||
{{OpenKhowHowManifest | |||
|manifest-date-created= | |||
|manifest-date-updated=2020-06-04 | |||
|manifest-author-name=Kathy Nativi | |||
|manifest-author-affiliation=Appropedia | |||
|manifest-autho-email=info@appropedia.org | |||
|title=Powder maker - Chilies and herbs | |||
|description=Powder maker - Chillies and Herbs | |||
|intended-use=development | |||
|keywords= | |||
|project-link= | |||
|contact-affiliation=MOST | |||
|contact-appropedia-user=User:Salils.1807 | |||
|image=File:1.jpg | |||
|development-stage= | |||
|made=No | |||
|made-independently=No | |||
|derivative-of= | |||
|manufacturing-files=https://www.youmagine.com/designs/powder-maker-chillies-and-herbs | |||
|manifest-language=eng | |||
|date-published= | |||
|main-materials=Plastic | |||
|estimated-cost-amount= 1.50 | |||
|estimated-cost-currencyUSD | |||
|sustainable-development-goal=Sustainable Development Goal 2, Sustainable Development Goal 8 | |||
|documentation-language=eng | |||
}} | |||
<!--end infobox--> | |||
==Powder maker - Chillies and Herbs== | ==Powder maker - Chillies and Herbs== | ||
Project developed by [Salil Sanjay Sule http://www.appropedia.org/User:Salils.1807] | Project developed by [Salil Sanjay Sule http://www.appropedia.org/User:Salils.1807] |
Revision as of 00:47, 12 June 2020
Powder maker - Chillies and Herbs
Project developed by [Salil Sanjay Sule http://www.appropedia.org/User:Salils.1807]
Template:Statusboxtop Template:Status-prototype You can help Appropedia by contributing to the next step in this OSAT's status. Template:Boxbottom
Abstract
- Herbs, spices and chillies are produced in India and Brazil extensively. But lack of simple and cost-effective technology is a big issue in rural regions of such developing countries. Usually, herbs and dried chillies are made into a powdered form using heavy stones for crushing purpose. Thus considering the amount of input work and its output, I have designed a simple but robust grinder which is very cost effective and can be used by anyone for the same purpose.
- Powder maker - Chillies and Herbs
Bill of Materials
PLA filament- $1
Tools needed for fabrication of the OSAT
- MOST Delta RepRap or similar RepRap 3-D printer
- PLA Filament
Skills and Knowledge Necessary to Make the OSAT
- 3D Modelling Software
- Matter control software
Technical Specifications and Assembly Instructions
- Download the .stl files from YouMagine website.
- Use at least 20% infill in CURA or any other matter control software to ensure the robustness needed for this device to work.
- The setting parameters for outer layer thickness and print quality should be really accurate in order to print the teeth on both parts really sharp.
- The print time required for both the parts to print is around 5 hours due to the fine printing.
- The cost associated with this product is really less as it uses both 3D printed parts.
Common Problems and Solutions
- The teeth might break due to excessive force on the product to grind. This problem can be easily solved by increasing the height of the teeth.
- To increase the efficiency of this device, one can also increase the number of teeth on both the parts.
- The teeth orientation can be altered if different types of objects are to be grounded.
Cost savings
- The estimated cost of this device is around $1.50 and can be further reduced if the part is mass produced using less expensive material.
- commercial model [1]
- $10-$15 can be saved by printing each of this device.