No edit summary |
mNo edit summary |
||
Line 15: | Line 15: | ||
[[Image:open_source_mirror_holder.jpg|thumb|left|Fig 1: Open Source Mirror Holder]] | [[Image:open_source_mirror_holder.jpg|thumb|left|Fig 1: Open Source Mirror Holder]] | ||
The mirror mount consists of three components: the metal rod, the plastic base, and the mirror holder. The mirror holder is not open source and is a commercial kinematic mirror mount from Thor Labs, the [ | The mirror mount consists of three components: the metal rod, the plastic base, and the mirror holder. The mirror holder is not open source and is a commercial kinematic mirror mount from Thor Labs, the [http://www.thorlabs.com/thorProduct.cfm?partNumber=KM100 KM100]. The wide plastic base gives the whole setup stability and flexible placement. | ||
This optical component is not designed to be fitted into an optical breadboard or lab bench. The advantage of this is that there is no limit to placement for the lens holder within the optical system. However, the disadvantage is loss of stability associated with an optical lab bench. | This optical component is not designed to be fitted into an optical breadboard or lab bench. The advantage of this is that there is no limit to placement for the lens holder within the optical system. However, the disadvantage is loss of stability associated with an optical lab bench. |
Revision as of 20:44, 30 July 2012
Template:Statusboxtop Template:Status-design Template:Status-prototype Template:Status-verified Template:Boxbottom
This project is part of a collection on open source optics meant to radically reduce the cost of experimental optical equipment.
The mirror mount consists of three components: the metal rod, the plastic base, and the mirror holder. The mirror holder is not open source and is a commercial kinematic mirror mount from Thor Labs, the KM100. The wide plastic base gives the whole setup stability and flexible placement.
This optical component is not designed to be fitted into an optical breadboard or lab bench. The advantage of this is that there is no limit to placement for the lens holder within the optical system. However, the disadvantage is loss of stability associated with an optical lab bench.