Devon Smith (talk | contribs) |
m (PedroK moved page Obvious 3D printer technology based on 9. Prior Counteraction to Obvious 3D printer technology based on 09. Prior Counteraction) |
||
(8 intermediate revisions by 5 users not shown) | |||
Line 1: | Line 1: | ||
{{777}} | {{777 notice}} | ||
{{TRIZ-3D}} | {{TRIZ-3D}} | ||
[[User:Raclark|Raclark]] ([[User talk:Raclark|talk]]) 07:25, 1 December 2015 (PST) | [[User:Raclark|Raclark]] ([[User talk:Raclark|talk]]) 07:25, 1 December 2015 (PST) | ||
=Definition from http://www.triz40.com/aff_Principles_TRIZ.php= | == Definition from http://www.triz40.com/aff_Principles_TRIZ.php == | ||
If it will be necessary to do an action with both harmful and useful effects, this action should be replaced with anti-actions to control harmful effects. | If it will be necessary to do an action with both harmful and useful effects, this action should be replaced with anti-actions to control harmful effects. | ||
* Buffer a solution to prevent harm from extremes of pH. | |||
Create beforehand stresses in an object that will oppose known undesirable working stresses later on. | Create beforehand stresses in an object that will oppose known undesirable working stresses later on. | ||
* Pre-stress rebar before pouring concrete. | |||
* Masking anything before harmful exposure: Use a lead apron on parts of the body not being exposed to X-rays. Use masking tape to protect the part of an object not being painted | |||
This principle is proposed to solve the following contradictions: | This principle is proposed to solve the following contradictions: | ||
2/325/276/47/148/1410/310/711/1412/1513/1414/614/815/317/317/419/1420/222/227/329/232/3434/934/1436/3337/2538/15 | 2/325/276/47/148/1410/310/711/1412/1513/1414/614/815/317/317/419/1420/222/227/329/232/3434/934/1436/3337/2538/15 | ||
=Solutions= | == Solutions == | ||
# '''only allow bonding of printed material on certain areas of substrate to improve resolution (masking)''' [[User:Raclark|Raclark]] ([[User talk:Raclark|talk]]) 07:53, 1 December 2015 (PST) | |||
# create print head with multiple extrusion points to speed printing in high resolution [[User:Raclark|Raclark]] ([[User talk:Raclark|talk]]) 07:53, 1 December 2015 (PST) | |||
# stabilize printer with weights from shaking due to fast extruder head movement [[User:Raclark|Raclark]] ([[User talk:Raclark|talk]]) 07:43, 1 December 2015 (PST) | |||
# design more universal and flexible extruder drive (like Chinese finger trap) [[User:Raclark|Raclark]] ([[User talk:Raclark|talk]]) 07:43, 1 December 2015 (PST) | |||
# design retrofit of old parts to new printers to eliminate waste [[User:Raclark|Raclark]] ([[User talk:Raclark|talk]]) 07:43, 1 December 2015 (PST) | |||
# use popular user interfaces to eliminate familiarizing time [[User:Raclark|Raclark]] ([[User talk:Raclark|talk]]) 07:43, 1 December 2015 (PST) | |||
# add motion sensors to turn off printer if object enters print area [[User:Raclark|Raclark]] ([[User talk:Raclark|talk]]) 07:53, 1 December 2015 (PST) | |||
# design cooled shield to protect user from accidentally touching hot end when heated [[User:Raclark|Raclark]] ([[User talk:Raclark|talk]]) 07:53, 1 December 2015 (PST) | |||
# release chemical in air to bond with volatiles from printing to form inert and safe to breathe compound [[User:Raclark|Raclark]] ([[User talk:Raclark|talk]]) 07:53, 1 December 2015 (PST) | |||
# release chemical in air to bond with volatiles from printing to form pleasant smelling compound [[User:Raclark|Raclark]] ([[User talk:Raclark|talk]]) 07:53, 1 December 2015 (PST) | |||
# introduce additive to thermoplastic that releases a pleasant scent upon heating [[User:Raclark|Raclark]] ([[User talk:Raclark|talk]]) 07:53, 1 December 2015 (PST) | |||
# design lighter parts by filling with lighter than air gas [[User:Raclark|Raclark]] ([[User talk:Raclark|talk]]) 07:06, 3 December 2015 (PST) | |||
# '''print glue stick''' [[User:Raclark|Raclark]] ([[User talk:Raclark|talk]]) 07:06, 3 December 2015 (PST) | |||
# add waste bin attachment to printer to keep waste [[User:Raclark|Raclark]] ([[User talk:Raclark|talk]]) 07:06, 3 December 2015 (PST) | |||
# install noise dampening cushions [[User:Raclark|Raclark]] ([[User talk:Raclark|talk]]) 07:06, 3 December 2015 (PST) | |||
# make all parts waterproof [[User:Raclark|Raclark]] ([[User talk:Raclark|talk]]) 07:06, 3 December 2015 (PST) | |||
# print all parts from high temperature alloys [[User:Raclark|Raclark]] ([[User talk:Raclark|talk]]) 07:06, 3 December 2015 (PST) | |||
# add thermal curtains for printing in cold environments [[User:Raclark|Raclark]] ([[User talk:Raclark|talk]]) 07:06, 3 December 2015 (PST) | |||
# add thermal sink to convert excess heat to energy [[User:Raclark|Raclark]] ([[User talk:Raclark|talk]]) 07:11, 3 December 2015 (PST) | |||
# use carbon nanotubes to strengthen prints [[User:Raclark|Raclark]] ([[User talk:Raclark|talk]]) 07:11, 3 December 2015 (PST) | |||
# install safety latches on electronic cables [[User:Raclark|Raclark]] ([[User talk:Raclark|talk]]) 07:11, 3 December 2015 (PST) | |||
# '''follow print path with laser to confirm print successful as it's printing''' [[User:Raclark|Raclark]] ([[User talk:Raclark|talk]]) 07:15, 3 December 2015 (PST) | |||
# '''design printed parts with labels corresponding to how they fit into other printed parts''' [[User:Raclark|Raclark]] ([[User talk:Raclark|talk]]) 07:15, 3 December 2015 (PST) | |||
# design sound-absorbent curtains [[User:Raclark|Raclark]] ([[User talk:Raclark|talk]]) 07:19, 3 December 2015 (PST) | |||
# design self cleaning print bed to scrap excess glue [[User:Raclark|Raclark]] ([[User talk:Raclark|talk]]) 07:19, 3 December 2015 (PST) | |||
# Stabilize printer by eliminating number of structural components[[User:Jcvieau|Jcvieau]] ([[User talk:Jcvieau|talk]]) 07:40, 1 December 2016 (PST) | |||
# Self cleaning/heating bed for reduce waste [[User:Jcvieau|Jcvieau]] ([[User talk:Jcvieau|talk]]) 07:39, 1 December 2016 (PST) | |||
# Use of "Lock Tite" to eliminate loosening of connecting fasteners [[User:Jcvieau|Jcvieau]] ([[User talk:Jcvieau|talk]]) 07:42, 1 December 2016 (PST) | |||
# '''Design adhesive addition to hot end to reduce the over use of glue stick''' [[User:Jcvieau|Jcvieau]] ([[User talk:Jcvieau|talk]]) 07:48, 1 December 2016 (PST) | |||
# Design a "non-jammed nozzle" to eliminating printer jamming resulting in poor parts [[User:Jcvieau|Jcvieau]] ([[User talk:Jcvieau|talk]]) 07:48, 1 December 2016 (PST) | |||
* --- | |||
# Damping feet to help with vibration [[User:Patrick Gilland|Patrick Gilland]] ([[User talk:Patrick Gilland|talk]]) 07:13, 4 December 2018 (PST) | |||
'''#Mounted glue stick to print a glue layer first [[User:Patrick Gilland|Patrick Gilland]] ([[User talk:Patrick Gilland|talk]]) 07:13, 4 December 2018 (PST)''' | |||
# | |||
# Enclosure for print bed [[User:Patrick Gilland|Patrick Gilland]] ([[User talk:Patrick Gilland|talk]]) 07:13, 4 December 2018 (PST) | |||
# Filament untangle device (wedge thing) [[User:Patrick Gilland|Patrick Gilland]] ([[User talk:Patrick Gilland|talk]]) 07:13, 4 December 2018 (PST) | |||
#Enclosure for print bed [[User:Patrick Gilland|Patrick Gilland]] ([[User talk:Patrick Gilland|talk]]) 07:13, 4 December 2018 (PST) | # Nozzle cleaning heat cycle before each print [[User:Patrick Gilland|Patrick Gilland]] ([[User talk:Patrick Gilland|talk]]) 07:13, 4 December 2018 (PST) | ||
#Filament untangle device (wedge thing) [[User:Patrick Gilland|Patrick Gilland]] ([[User talk:Patrick Gilland|talk]]) 07:13, 4 December 2018 (PST) | # Sensor to detect filament break [[User:Patrick Gilland|Patrick Gilland]] ([[User talk:Patrick Gilland|talk]]) 07:13, 4 December 2018 (PST) | ||
#Nozzle cleaning heat cycle before each print [[User:Patrick Gilland|Patrick Gilland]] ([[User talk:Patrick Gilland|talk]]) 07:13, 4 December 2018 (PST) | # Bed heating clean cycle after each print [[User:Patrick Gilland|Patrick Gilland]] ([[User talk:Patrick Gilland|talk]]) 07:13, 4 December 2018 (PST) | ||
#Sensor to detect filament break [[User:Patrick Gilland|Patrick Gilland]] ([[User talk:Patrick Gilland|talk]]) 07:13, 4 December 2018 (PST) | # Sponge pass through for filament cleaning [[User:Patrick Gilland|Patrick Gilland]] ([[User talk:Patrick Gilland|talk]]) 07:13, 4 December 2018 (PST) | ||
#Bed heating clean cycle after each print [[User:Patrick Gilland|Patrick Gilland]] ([[User talk:Patrick Gilland|talk]]) 07:13, 4 December 2018 (PST) | # Automated tracking of print time to proactively alert for maintenance needs [[User:Patrick Gilland|Patrick Gilland]] ([[User talk:Patrick Gilland|talk]]) 07:13, 4 December 2018 (PST) | ||
#Sponge pass through for filament cleaning [[User:Patrick Gilland|Patrick Gilland]] ([[User talk:Patrick Gilland|talk]]) 07:13, 4 December 2018 (PST) | # Printer shutdown after certain amount of idle time [[User:Patrick Gilland|Patrick Gilland]] ([[User talk:Patrick Gilland|talk]]) 07:13, 4 December 2018 (PST) | ||
#Automated tracking of print time to proactively alert for maintenance needs [[User:Patrick Gilland|Patrick Gilland]] ([[User talk:Patrick Gilland|talk]]) 07:13, 4 December 2018 (PST) | # Have nozzle push 3 buttons before heating to verify that the calibration is still good [[User:Patrick Gilland|Patrick Gilland]] ([[User talk:Patrick Gilland|talk]]) 07:13, 4 December 2018 (PST) | ||
#Printer shutdown after certain amount of idle time [[User:Patrick Gilland|Patrick Gilland]] ([[User talk:Patrick Gilland|talk]]) 07:13, 4 December 2018 (PST) | # Use the same buttons to self calibrate before each print [[User:Patrick Gilland|Patrick Gilland]] ([[User talk:Patrick Gilland|talk]]) 07:13, 4 December 2018 (PST) | ||
#Have nozzle push 3 buttons before heating to verify that the calibration is still good [[User:Patrick Gilland|Patrick Gilland]] ([[User talk:Patrick Gilland|talk]]) 07:13, 4 December 2018 (PST) | # Optical sensor to make sure plastic is being properly put down (speed adjusts based on results) [[User:Patrick Gilland|Patrick Gilland]] ([[User talk:Patrick Gilland|talk]]) 07:13, 4 December 2018 (PST) | ||
#Use the same buttons to self calibrate before each print [[User:Patrick Gilland|Patrick Gilland]] ([[User talk:Patrick Gilland|talk]]) 07:13, 4 December 2018 (PST) | # Second extruder that comes on when second one tangles or runs out [[User:Patrick Gilland|Patrick Gilland]] ([[User talk:Patrick Gilland|talk]]) 07:13, 4 December 2018 (PST) | ||
#Optical sensor to make sure plastic is being properly put down (speed adjusts based on results) [[User:Patrick Gilland|Patrick Gilland]] ([[User talk:Patrick Gilland|talk]]) 07:13, 4 December 2018 (PST) | # Develop other print bed solutions for adhesion [[User:Patrick Gilland|Patrick Gilland]] ([[User talk:Patrick Gilland|talk]]) 07:13, 4 December 2018 (PST) | ||
#Second extruder that comes on when second one tangles or runs out [[User:Patrick Gilland|Patrick Gilland]] ([[User talk:Patrick Gilland|talk]]) 07:13, 4 December 2018 (PST) | # Automated heated print removing blade [[User:Patrick Gilland|Patrick Gilland]] ([[User talk:Patrick Gilland|talk]]) 07:13, 4 December 2018 (PST) | ||
#Develop other print bed solutions for adhesion [[User:Patrick Gilland|Patrick Gilland]] ([[User talk:Patrick Gilland|talk]]) 07:13, 4 December 2018 (PST) | # Counter weighting printer [[User:Patrick Gilland|Patrick Gilland]] ([[User talk:Patrick Gilland|talk]]) 07:13, 4 December 2018 (PST) | ||
#Automated heated print removing blade [[User:Patrick Gilland|Patrick Gilland]] ([[User talk:Patrick Gilland|talk]]) 07:13, 4 December 2018 (PST) | # Circuit completed by rod end connections for rod connection break detection [[User:Patrick Gilland|Patrick Gilland]] ([[User talk:Patrick Gilland|talk]]) 07:13, 4 December 2018 (PST) | ||
#Counter weighting printer [[User:Patrick Gilland|Patrick Gilland]] ([[User talk:Patrick Gilland|talk]]) 07:13, 4 December 2018 (PST) | # Belt tightness detection for warning when belts need tightening | ||
#Circuit completed by rod end connections for rod connection break detection [[User:Patrick Gilland|Patrick Gilland]] ([[User talk:Patrick Gilland|talk]]) 07:13, 4 December 2018 (PST) | # Noise damping device [[User:Patrick Gilland|Patrick Gilland]] ([[User talk:Patrick Gilland|talk]]) 07:13, 4 December 2018 (PST) | ||
#Belt tightness detection for warning when belts need tightening | * --- | ||
#Noise damping device [[User:Patrick Gilland|Patrick Gilland]] ([[User talk:Patrick Gilland|talk]]) 07:13, 4 December 2018 (PST) | # clean each spool of plastic before using it for printing[[User:Devon Smith|Devon Smith]] ([[User talk:Devon Smith|talk]]) 07:26, 4 December 2018 (PST) | ||
# store spool of plastic in safe hydro controlled location[[User:Devon Smith|Devon Smith]] ([[User talk:Devon Smith|talk]]) 07:26, 4 December 2018 (PST) | |||
#clean each spool of plastic before using it for printing[[User:Devon Smith|Devon Smith]] ([[User talk:Devon Smith|talk]]) 07:26, 4 December 2018 (PST) | # dry filament beforee use[[User:Devon Smith|Devon Smith]] ([[User talk:Devon Smith|talk]]) 07:26, 4 December 2018 (PST) | ||
#store spool of plastic in safe hydro controlled location[[User:Devon Smith|Devon Smith]] ([[User talk:Devon Smith|talk]]) 07:26, 4 December 2018 (PST) | # Grease the critical components[[User:Devon Smith|Devon Smith]] ([[User talk:Devon Smith|talk]]) 07:26, 4 December 2018 (PST) | ||
#dry filament beforee use[[User:Devon Smith|Devon Smith]] ([[User talk:Devon Smith|talk]]) 07:26, 4 December 2018 (PST) | # double sided tape printer to permanent location[[User:Devon Smith|Devon Smith]] ([[User talk:Devon Smith|talk]]) 07:26, 4 December 2018 (PST) | ||
#Grease the critical components[[User:Devon Smith|Devon Smith]] ([[User talk:Devon Smith|talk]]) 07:26, 4 December 2018 (PST) | # build a bullet proof glass scare around computer[[User:Devon Smith|Devon Smith]] ([[User talk:Devon Smith|talk]]) 07:26, 4 December 2018 (PST) | ||
#double sided tape printer to permanent location[[User:Devon Smith|Devon Smith]] ([[User talk:Devon Smith|talk]]) 07:26, 4 December 2018 (PST) | # build a fixture to align the printer and lock it into it's location[[User:Devon Smith|Devon Smith]] ([[User talk:Devon Smith|talk]]) 07:26, 4 December 2018 (PST) | ||
#build a bullet proof glass scare around computer[[User:Devon Smith|Devon Smith]] ([[User talk:Devon Smith|talk]]) 07:26, 4 December 2018 (PST) | # save extra files of build to allow to recovery of deleted files[[User:Devon Smith|Devon Smith]] ([[User talk:Devon Smith|talk]]) 07:26, 4 December 2018 (PST) | ||
#build a fixture to align the printer and lock it into it's location[[User:Devon Smith|Devon Smith]] ([[User talk:Devon Smith|talk]]) 07:26, 4 December 2018 (PST) | |||
#save extra files of build to allow to recovery of deleted files[[User:Devon Smith|Devon Smith]] ([[User talk:Devon Smith|talk]]) 07:26, 4 December 2018 (PST) | |||
# continually clean print bed[[User:Devon Smith|Devon Smith]] ([[User talk:Devon Smith|talk]]) 07:26, 4 December 2018 (PST) | # continually clean print bed[[User:Devon Smith|Devon Smith]] ([[User talk:Devon Smith|talk]]) 07:26, 4 December 2018 (PST) | ||
#add a cage around the hot end to allow people to not burn themselves[[User:Devon Smith|Devon Smith]] ([[User talk:Devon Smith|talk]]) 07:26, 4 December 2018 (PST) | # add a cage around the hot end to allow people to not burn themselves[[User:Devon Smith|Devon Smith]] ([[User talk:Devon Smith|talk]]) 07:26, 4 December 2018 (PST) | ||
#don't use materials known to have program wok properly[[User:Devon Smith|Devon Smith]] ([[User talk:Devon Smith|talk]]) 07:26, 4 December 2018 (PST) | # don't use materials known to have program wok properly[[User:Devon Smith|Devon Smith]] ([[User talk:Devon Smith|talk]]) 07:26, 4 December 2018 (PST) | ||
#put safety catch on print head so if it knocks of the printer it will remain of then | # put safety catch on print head so if it knocks of the printer it will remain of then | ||
* --- | |||
# autolevel bed before the print starts [[User:JasonBell|JasonBell]] ([[User talk:JasonBell|talk]]) 15:17, 3 December 2019 (UTC) | |||
# scrape the print bed off after each print and apply more glue [[User:JasonBell|JasonBell]] ([[User talk:JasonBell|talk]]) 15:17, 3 December 2019 (UTC) | |||
# continuously load filament before a spool runs completely dry [[User:JasonBell|JasonBell]] ([[User talk:JasonBell|talk]]) 15:17, 3 December 2019 (UTC) | |||
# self lubricate moving components [[User:JasonBell|JasonBell]] ([[User talk:JasonBell|talk]]) 15:17, 3 December 2019 (UTC) | |||
# remove old solid print off of bed automaticly [[User:JasonBell|JasonBell]] ([[User talk:JasonBell|talk]]) 15:17, 3 December 2019 (UTC) | |||
# Preheat nozzle on startup [[User:JasonBell|JasonBell]] ([[User talk:JasonBell|talk]]) 15:17, 3 December 2019 (UTC) | |||
# Make the bed flexible and sticky / no need to scrape or have glue [[User:JasonBell|JasonBell]] ([[User talk:JasonBell|talk]]) 15:17, 3 December 2019 (UTC) | |||
no restrictions | |||
# smart filament spools with multiple materials in one (dissolving, different strengths) [[User:JasonBell|JasonBell]] ([[User talk:JasonBell|talk]]) 15:33, 3 December 2019 (UTC) | |||
# purposely poor bed adhesion for easy removal [[User:JasonBell|JasonBell]] ([[User talk:JasonBell|talk]]) 15:33, 3 December 2019 (UTC) | |||
# weaker supports [[User:JasonBell|JasonBell]] ([[User talk:JasonBell|talk]]) 15:33, 3 December 2019 (UTC) | |||
# collapsable printer (fit in backpack pocket) [[User:JasonBell|JasonBell]] ([[User talk:JasonBell|talk]]) 15:33, 3 December 2019 (UTC) | |||
# disposable print bed that allows for good adhesion and is removable [[User:JasonBell|JasonBell]] ([[User talk:JasonBell|talk]]) 15:33, 3 December 2019 (UTC) | |||
# suspended cable printing (no rods) | |||
{{Page data}} | |||
[[Category:4777 TRIZ 3D printers]] |
Latest revision as of 12:49, 11 April 2023
Raclark (talk) 07:25, 1 December 2015 (PST)
Definition from http://www.triz40.com/aff_Principles_TRIZ.php[edit | edit source]
If it will be necessary to do an action with both harmful and useful effects, this action should be replaced with anti-actions to control harmful effects.
- Buffer a solution to prevent harm from extremes of pH.
Create beforehand stresses in an object that will oppose known undesirable working stresses later on.
- Pre-stress rebar before pouring concrete.
- Masking anything before harmful exposure: Use a lead apron on parts of the body not being exposed to X-rays. Use masking tape to protect the part of an object not being painted
This principle is proposed to solve the following contradictions: 2/325/276/47/148/1410/310/711/1412/1513/1414/614/815/317/317/419/1420/222/227/329/232/3434/934/1436/3337/2538/15
Solutions[edit | edit source]
- only allow bonding of printed material on certain areas of substrate to improve resolution (masking) Raclark (talk) 07:53, 1 December 2015 (PST)
- create print head with multiple extrusion points to speed printing in high resolution Raclark (talk) 07:53, 1 December 2015 (PST)
- stabilize printer with weights from shaking due to fast extruder head movement Raclark (talk) 07:43, 1 December 2015 (PST)
- design more universal and flexible extruder drive (like Chinese finger trap) Raclark (talk) 07:43, 1 December 2015 (PST)
- design retrofit of old parts to new printers to eliminate waste Raclark (talk) 07:43, 1 December 2015 (PST)
- use popular user interfaces to eliminate familiarizing time Raclark (talk) 07:43, 1 December 2015 (PST)
- add motion sensors to turn off printer if object enters print area Raclark (talk) 07:53, 1 December 2015 (PST)
- design cooled shield to protect user from accidentally touching hot end when heated Raclark (talk) 07:53, 1 December 2015 (PST)
- release chemical in air to bond with volatiles from printing to form inert and safe to breathe compound Raclark (talk) 07:53, 1 December 2015 (PST)
- release chemical in air to bond with volatiles from printing to form pleasant smelling compound Raclark (talk) 07:53, 1 December 2015 (PST)
- introduce additive to thermoplastic that releases a pleasant scent upon heating Raclark (talk) 07:53, 1 December 2015 (PST)
- design lighter parts by filling with lighter than air gas Raclark (talk) 07:06, 3 December 2015 (PST)
- print glue stick Raclark (talk) 07:06, 3 December 2015 (PST)
- add waste bin attachment to printer to keep waste Raclark (talk) 07:06, 3 December 2015 (PST)
- install noise dampening cushions Raclark (talk) 07:06, 3 December 2015 (PST)
- make all parts waterproof Raclark (talk) 07:06, 3 December 2015 (PST)
- print all parts from high temperature alloys Raclark (talk) 07:06, 3 December 2015 (PST)
- add thermal curtains for printing in cold environments Raclark (talk) 07:06, 3 December 2015 (PST)
- add thermal sink to convert excess heat to energy Raclark (talk) 07:11, 3 December 2015 (PST)
- use carbon nanotubes to strengthen prints Raclark (talk) 07:11, 3 December 2015 (PST)
- install safety latches on electronic cables Raclark (talk) 07:11, 3 December 2015 (PST)
- follow print path with laser to confirm print successful as it's printing Raclark (talk) 07:15, 3 December 2015 (PST)
- design printed parts with labels corresponding to how they fit into other printed parts Raclark (talk) 07:15, 3 December 2015 (PST)
- design sound-absorbent curtains Raclark (talk) 07:19, 3 December 2015 (PST)
- design self cleaning print bed to scrap excess glue Raclark (talk) 07:19, 3 December 2015 (PST)
- Stabilize printer by eliminating number of structural componentsJcvieau (talk) 07:40, 1 December 2016 (PST)
- Self cleaning/heating bed for reduce waste Jcvieau (talk) 07:39, 1 December 2016 (PST)
- Use of "Lock Tite" to eliminate loosening of connecting fasteners Jcvieau (talk) 07:42, 1 December 2016 (PST)
- Design adhesive addition to hot end to reduce the over use of glue stick Jcvieau (talk) 07:48, 1 December 2016 (PST)
- Design a "non-jammed nozzle" to eliminating printer jamming resulting in poor parts Jcvieau (talk) 07:48, 1 December 2016 (PST)
- ---
- Damping feet to help with vibration Patrick Gilland (talk) 07:13, 4 December 2018 (PST)
#Mounted glue stick to print a glue layer first Patrick Gilland (talk) 07:13, 4 December 2018 (PST)
- Enclosure for print bed Patrick Gilland (talk) 07:13, 4 December 2018 (PST)
- Filament untangle device (wedge thing) Patrick Gilland (talk) 07:13, 4 December 2018 (PST)
- Nozzle cleaning heat cycle before each print Patrick Gilland (talk) 07:13, 4 December 2018 (PST)
- Sensor to detect filament break Patrick Gilland (talk) 07:13, 4 December 2018 (PST)
- Bed heating clean cycle after each print Patrick Gilland (talk) 07:13, 4 December 2018 (PST)
- Sponge pass through for filament cleaning Patrick Gilland (talk) 07:13, 4 December 2018 (PST)
- Automated tracking of print time to proactively alert for maintenance needs Patrick Gilland (talk) 07:13, 4 December 2018 (PST)
- Printer shutdown after certain amount of idle time Patrick Gilland (talk) 07:13, 4 December 2018 (PST)
- Have nozzle push 3 buttons before heating to verify that the calibration is still good Patrick Gilland (talk) 07:13, 4 December 2018 (PST)
- Use the same buttons to self calibrate before each print Patrick Gilland (talk) 07:13, 4 December 2018 (PST)
- Optical sensor to make sure plastic is being properly put down (speed adjusts based on results) Patrick Gilland (talk) 07:13, 4 December 2018 (PST)
- Second extruder that comes on when second one tangles or runs out Patrick Gilland (talk) 07:13, 4 December 2018 (PST)
- Develop other print bed solutions for adhesion Patrick Gilland (talk) 07:13, 4 December 2018 (PST)
- Automated heated print removing blade Patrick Gilland (talk) 07:13, 4 December 2018 (PST)
- Counter weighting printer Patrick Gilland (talk) 07:13, 4 December 2018 (PST)
- Circuit completed by rod end connections for rod connection break detection Patrick Gilland (talk) 07:13, 4 December 2018 (PST)
- Belt tightness detection for warning when belts need tightening
- Noise damping device Patrick Gilland (talk) 07:13, 4 December 2018 (PST)
- ---
- clean each spool of plastic before using it for printingDevon Smith (talk) 07:26, 4 December 2018 (PST)
- store spool of plastic in safe hydro controlled locationDevon Smith (talk) 07:26, 4 December 2018 (PST)
- dry filament beforee useDevon Smith (talk) 07:26, 4 December 2018 (PST)
- Grease the critical componentsDevon Smith (talk) 07:26, 4 December 2018 (PST)
- double sided tape printer to permanent locationDevon Smith (talk) 07:26, 4 December 2018 (PST)
- build a bullet proof glass scare around computerDevon Smith (talk) 07:26, 4 December 2018 (PST)
- build a fixture to align the printer and lock it into it's locationDevon Smith (talk) 07:26, 4 December 2018 (PST)
- save extra files of build to allow to recovery of deleted filesDevon Smith (talk) 07:26, 4 December 2018 (PST)
- continually clean print bedDevon Smith (talk) 07:26, 4 December 2018 (PST)
- add a cage around the hot end to allow people to not burn themselvesDevon Smith (talk) 07:26, 4 December 2018 (PST)
- don't use materials known to have program wok properlyDevon Smith (talk) 07:26, 4 December 2018 (PST)
- put safety catch on print head so if it knocks of the printer it will remain of then
- ---
- autolevel bed before the print starts JasonBell (talk) 15:17, 3 December 2019 (UTC)
- scrape the print bed off after each print and apply more glue JasonBell (talk) 15:17, 3 December 2019 (UTC)
- continuously load filament before a spool runs completely dry JasonBell (talk) 15:17, 3 December 2019 (UTC)
- self lubricate moving components JasonBell (talk) 15:17, 3 December 2019 (UTC)
- remove old solid print off of bed automaticly JasonBell (talk) 15:17, 3 December 2019 (UTC)
- Preheat nozzle on startup JasonBell (talk) 15:17, 3 December 2019 (UTC)
- Make the bed flexible and sticky / no need to scrape or have glue JasonBell (talk) 15:17, 3 December 2019 (UTC)
no restrictions
- smart filament spools with multiple materials in one (dissolving, different strengths) JasonBell (talk) 15:33, 3 December 2019 (UTC)
- purposely poor bed adhesion for easy removal JasonBell (talk) 15:33, 3 December 2019 (UTC)
- weaker supports JasonBell (talk) 15:33, 3 December 2019 (UTC)
- collapsable printer (fit in backpack pocket) JasonBell (talk) 15:33, 3 December 2019 (UTC)
- disposable print bed that allows for good adhesion and is removable JasonBell (talk) 15:33, 3 December 2019 (UTC)
- suspended cable printing (no rods)