J.M.Pearce (talk | contribs) mNo edit summary |
J.M.Pearce (talk | contribs) mNo edit summary |
||
Line 2: | Line 2: | ||
# Print in vacuum to avoid contamination [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:30, 1 December 2015 (PST) | # Print in vacuum to avoid contamination [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:30, 1 December 2015 (PST) | ||
# Print with inert gas for GMAW 3DP [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:30, 1 December 2015 (PST) | # Print with inert gas for GMAW 3DP [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:30, 1 December 2015 (PST) | ||
# Print with inert gas injected into plastic to reduce weight [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:30, 1 December 2015 (PST) | # '''Print with inert gas injected into plastic to reduce weight''' [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:30, 1 December 2015 (PST) | ||
# Print with inert gas injected into metal to reduce weight [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:30, 1 December 2015 (PST) | # Print with inert gas injected into metal to reduce weight [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:30, 1 December 2015 (PST) | ||
# Print with inert gas injected into ceramic to reduce weight [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:30, 1 December 2015 (PST) | # Print with inert gas injected into ceramic to reduce weight [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:30, 1 December 2015 (PST) | ||
# Print with inert gas around object to avoid ionizing radiation from ruining resolution in SLA [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:30, 1 December 2015 (PST) | # Print with inert gas around object to avoid ionizing radiation from ruining resolution in SLA [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:30, 1 December 2015 (PST) | ||
# Print with inert gas atmosphere while exposing to ionizing radiation to set up location of voxel [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:30, 1 December 2015 (PST) | # Print with inert gas atmosphere while exposing to ionizing radiation to set up location of voxel [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:30, 1 December 2015 (PST) | ||
# Print with inert gas inside a sol for insulation [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:32, 1 December 2015 (PST) | # '''Print with inert gas inside a sol for insulation''' [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:32, 1 December 2015 (PST) | ||
# Print with inert gas to create foam to 3DP isolation [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:32, 1 December 2015 (PST) | # Print with inert gas to create foam to 3DP isolation [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:32, 1 December 2015 (PST) | ||
# Print with inert gas in hyper cold environment to have inert gas solid [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:32, 1 December 2015 (PST) | # Print with inert gas in hyper cold environment to have inert gas solid [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:32, 1 December 2015 (PST) | ||
Line 16: | Line 16: | ||
# Print with inert gas injected into ceiling/floor in final step for energy efficient 3DP home [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:35, 1 December 2015 (PST) | # Print with inert gas injected into ceiling/floor in final step for energy efficient 3DP home [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:35, 1 December 2015 (PST) | ||
# Blow inert gas with pressure during FFF to improve resolution of fine prints [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:35, 1 December 2015 (PST) | # Blow inert gas with pressure during FFF to improve resolution of fine prints [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:35, 1 December 2015 (PST) | ||
# Blow inert gas at 3D print at end of print to remove from print bed[[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:35, 1 December 2015 (PST) | # '''Blow inert gas at 3D print at end of print to remove from print bed'''[[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:35, 1 December 2015 (PST) | ||
## Use this to automate multiprints [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:35, 1 December 2015 (PST) | ## Use this to automate multiprints [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:35, 1 December 2015 (PST) | ||
## Use for batch printing[[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:35, 1 December 2015 (PST) | ## Use for batch printing[[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:35, 1 December 2015 (PST) | ||
## Use for scaled production[[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:35, 1 December 2015 (PST) | ## Use for scaled production[[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:35, 1 December 2015 (PST) | ||
# Cool motors of 3DP to drive higher speeds with inert gas[[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:35, 1 December 2015 (PST) | # Cool motors of 3DP to drive higher speeds with inert gas[[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:35, 1 December 2015 (PST) | ||
# Print head as spaceship - use inert gas jets to move head into position for 3DP --[[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:37, 1 December 2015 (PST) | # '''Print head as spaceship - use inert gas jets to move head into position for 3DP''' --[[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:37, 1 December 2015 (PST) | ||
# Print head as sail boat - use inert gas jets to move head into position for 3DP --[[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:37, 1 December 2015 (PST) | # Print head as sail boat - use inert gas jets to move head into position for 3DP --[[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:37, 1 December 2015 (PST) | ||
# Surface for printing is "bed" of moving inert gas - shifts to position under printhead [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:37, 1 December 2015 (PST) | # Surface for printing is "bed" of moving inert gas - shifts to position under printhead [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:37, 1 December 2015 (PST) | ||
# For SLA printing deposit inert powder as filler to allow for overhangs [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:39, 1 December 2015 (PST) | # For SLA printing deposit inert powder as filler to allow for overhangs [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:39, 1 December 2015 (PST) | ||
# For SLA printing deposit inert active material to add functionality while being caged inside print [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:39, 1 December 2015 (PST) | # '''For SLA printing deposit inert active material to add functionality while being caged inside print''' [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:39, 1 December 2015 (PST) | ||
## e.g. electronics | ## e.g. electronics | ||
## e.g. LED | ## e.g. LED | ||
## e.g. gas sensor | ## e.g. gas sensor | ||
# Print with inert powder as filler in FFF to allow for lower costs [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:39, 1 December 2015 (PST) | # '''Print with inert powder as filler in FFF to allow for lower costs''' [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:39, 1 December 2015 (PST) | ||
## e.g. for dumping waste to add weight | ## e.g. for dumping waste to add weight | ||
## e.g. to avoid overhangs as internal fill | ## e.g. to avoid overhangs as internal fill | ||
# Could have 2 print heads - one FFF and one dump powder for save reasons as above [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:39, 1 December 2015 (PST) | # '''Could have 2 print heads - one FFF and one dump powder for save reasons as above''' [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:39, 1 December 2015 (PST) | ||
# Use inert pellets as fill in large 3DP - as in concrete aggregate 3DP --07:40, 1 December 2015 (PST) | # '''Use inert pellets as fill in large 3DP - as in concrete aggregate 3DP''' --07:40, 1 December 2015 (PST) |
Revision as of 15:42, 1 December 2015
- Print in vacuum to avoid contamination Joshua (talk) 07:30, 1 December 2015 (PST)
- Print with inert gas for GMAW 3DP Joshua (talk) 07:30, 1 December 2015 (PST)
- Print with inert gas injected into plastic to reduce weight Joshua (talk) 07:30, 1 December 2015 (PST)
- Print with inert gas injected into metal to reduce weight Joshua (talk) 07:30, 1 December 2015 (PST)
- Print with inert gas injected into ceramic to reduce weight Joshua (talk) 07:30, 1 December 2015 (PST)
- Print with inert gas around object to avoid ionizing radiation from ruining resolution in SLA Joshua (talk) 07:30, 1 December 2015 (PST)
- Print with inert gas atmosphere while exposing to ionizing radiation to set up location of voxel Joshua (talk) 07:30, 1 December 2015 (PST)
- Print with inert gas inside a sol for insulation Joshua (talk) 07:32, 1 December 2015 (PST)
- Print with inert gas to create foam to 3DP isolation Joshua (talk) 07:32, 1 December 2015 (PST)
- Print with inert gas in hyper cold environment to have inert gas solid Joshua (talk) 07:32, 1 December 2015 (PST)
- Print with inert gas in vacuum to have 3D printed gas in space Joshua (talk) 07:32, 1 December 2015 (PST)
- Print with inert gas injected into window in final step for low 3 glass multipane windows in 3DP home Joshua (talk) 07:35, 1 December 2015 (PST)
- Print with inert gas injected into walls in final step for energy efficient 3DP home Joshua (talk) 07:35, 1 December 2015 (PST)
- Print with inert gas injected into ceiling/floor in final step for energy efficient 3DP home Joshua (talk) 07:35, 1 December 2015 (PST)
- Blow inert gas with pressure during FFF to improve resolution of fine prints Joshua (talk) 07:35, 1 December 2015 (PST)
- Blow inert gas at 3D print at end of print to remove from print bedJoshua (talk) 07:35, 1 December 2015 (PST)
- Cool motors of 3DP to drive higher speeds with inert gasJoshua (talk) 07:35, 1 December 2015 (PST)
- Print head as spaceship - use inert gas jets to move head into position for 3DP --Joshua (talk) 07:37, 1 December 2015 (PST)
- Print head as sail boat - use inert gas jets to move head into position for 3DP --Joshua (talk) 07:37, 1 December 2015 (PST)
- Surface for printing is "bed" of moving inert gas - shifts to position under printhead Joshua (talk) 07:37, 1 December 2015 (PST)
- For SLA printing deposit inert powder as filler to allow for overhangs Joshua (talk) 07:39, 1 December 2015 (PST)
- For SLA printing deposit inert active material to add functionality while being caged inside print Joshua (talk) 07:39, 1 December 2015 (PST)
- e.g. electronics
- e.g. LED
- e.g. gas sensor
- Print with inert powder as filler in FFF to allow for lower costs Joshua (talk) 07:39, 1 December 2015 (PST)
- e.g. for dumping waste to add weight
- e.g. to avoid overhangs as internal fill
- Could have 2 print heads - one FFF and one dump powder for save reasons as above Joshua (talk) 07:39, 1 December 2015 (PST)
- Use inert pellets as fill in large 3DP - as in concrete aggregate 3DP --07:40, 1 December 2015 (PST)