Get our free book (in Spanish or English) on rainwater now - To Catch the Rain.

Obvious 3D printer technology based on 19. Periodic action

From Appropedia
Jump to navigation Jump to search
MOST Delta filament as guide.JPG This page was part of an MTU course MSE4777 OA and MSE4777 OB/MSE5777/EE4777/EE5777: Open-source 3-D printing

Please leave comments using the discussion tab. The course runs in the Fall semester. It is not open edit.


  1. pulsing hot end Cleyton (talk) 07:34, 1 December 2015 (PST) Erik Bain (talk) 07:39, 1 December 2015 (PST)
  2. rotating bed Cleyton (talk) 07:34, 1 December 2015 (PST) Erik Bain (talk) 07:39, 1 December 2015 (PST)
  3. multiple material print heads Cleyton (talk) 07:34, 1 December 2015 (PST) Erik Bain (talk) 07:39, 1 December 2015 (PST)
  4. assembly line of printers Cleyton (talk) 07:34, 1 December 2015 (PST)Erik Bain (talk) 07:39, 1 December 2015 (PST)
  5. print more efficiently with optics Cleyton (talk) 07:34, 1 December 2015 (PST) Erik Bain (talk) 07:39, 1 December 2015 (PST)
  6. printer that has auto set up (bed cleaning, heat up automatic) Cleyton (talk) 07:34, 1 December 2015 (PST) Erik Bain (talk) 07:39, 1 December 2015 (PST)
  7. vibrating hot end (self cleaning) Erik Bain (talk) 07:39, 1 December 2015 (PST) Cleyton (talk) 07:39, 1 December 2015 (PST)
  8. Print at lower motor frequencies to reduce noise Cleyton (talk) 07:34, 1 December 2015 (PST) Erik Bain (talk) 07:39, 1 December 2015 (PST)
  9. print different components at the same time Erik Bain (talk) 07:44, 1 December 2015 (PST)
  10. vibrating bed to releaase print when it's done Erik Bain (talk) 07:44, 1 December 2015 (PST)
  11. more steps in stepper motor to increase resolution Erik Bain (talk) 07:46, 1 December 2015 (PST) Cleyton (talk) 07:46, 1 December 2015 (PST)
  12. sound waves to sense location of bed, auto calibration Cleyton (talk) 07:48, 1 December 2015 (PST) Erik Bain (talk) 07:54, 1 December 2015 (PST)
  13. sound waves to sense location of object, ensure quality print Cleyton (talk) 07:48, 1 December 2015 (PST) Erik Bain (talk) 07:54, 1 December 2015 (PST)
  14. use optics to send more information Cleyton (talk) 07:52, 1 December 2015 (PST) Erik Bain (talk) 07:54, 1 December 2015 (PST)
  15. Split print into sections to ensure cooling time Cleyton (talk) 07:52, 1 December 2015 (PST) Erik Bain (talk) 07:54, 1 December 2015 (PST)
  16. Use multiple identical hot ends during print to put out more plastic Cleyton (talk) 07:52, 1 December 2015 (PST) Erik Bain (talk) 07:54, 1 December 2015 (PST)
  17. Sounds a proximity alarm Cleyton (talk) 06:59, 3 December 2015 (PST)
  18. print different sections at different times to have fully moveable parts. Cleyton (talk) 06:59, 3 December 2015 (PST)