J.M.Pearce (talk | contribs) (Created page with "{{777}} This project is to design and print a rock wall hold. # Create [http://www.thingiverse.com/ Thingiverse] Account # Download template SCAD for hex bolt: [http://www.t...") |
J.M.Pearce (talk | contribs) mNo edit summary |
||
| Line 9: | Line 9: | ||
# Post your SCAD, STL and a picture of your print on Thingiverse as a derivative of [http://www.thingiverse.com/thing:481050] using an appropriate OS license | # Post your SCAD, STL and a picture of your print on Thingiverse as a derivative of [http://www.thingiverse.com/thing:481050] using an appropriate OS license | ||
# Either write on the back of your print or put tape with your name on it for your hold | # Either write on the back of your print or put tape with your name on it for your hold | ||
# Prints will be collected in class on the due date | # Prints will be collected in class on the due date '''10/9''' | ||
Revision as of 12:56, 2 October 2014
This project is to design and print a rock wall hold.
- Create Thingiverse Account
- Download template SCAD for hex bolt: [1]
- Using OpenSCAD design an original rock wall hold better than this. No derivatives from any other design, no mashups, no importation of other code
- Print your design on your RepRap using an appropriate fill for a human dangling from a cliff
- Post your SCAD, STL and a picture of your print on Thingiverse as a derivative of [2] using an appropriate OS license
- Either write on the back of your print or put tape with your name on it for your hold
- Prints will be collected in class on the due date 10/9