(Created page with "{{777}} ==MOST Delta Performance Mod == Project developed by --~~~~ <gallery> File:Delta_heat_Shield.JPG| External Heat Shield File:Insulated_Testing.JPG|Testing Insulation C...") |
No edit summary |
||
| Line 23: | Line 23: | ||
== Technical Specifications and Assembly Instructions== | == Technical Specifications and Assembly Instructions== | ||
*Total assembly time is roughly one hour.. | *Total assembly time is roughly one hour.. | ||
== Notes == | |||
After testing various combinations of plywood and available sheetrock, and their insulating values, I settled on aluminum foil wrapped cardboard as the most accessible and affordable. However, this does not diminish the quality of insulating ability provided. | |||
=== Assembly Instructions === | === Assembly Instructions === | ||
Revision as of 14:51, 11 December 2014
MOST Delta Performance Mod
Project developed by --Jmbrooki (talk) 06:48, 11 December 2014 (PST)
-
External Heat Shield
-
Testing Insulation Capability
-
Cooling Rate (Degrees F vs Minutes)
-
New Hotend (E3D v6)
Template:Statusboxtop Template:Status-design Template:Status-prototype You can help Appropedia by contributing to the next step in this OSAT's status. Template:Boxbottom
Abstract
- In order to print materials other than PLA, a controlled environment is needed to prevent rapid cooling which leads to plastic warping.
Bill of Materials
- (3) 12x18in thick cardboard
- Aluminum Foil to Cover
Technical Specifications and Assembly Instructions
- Total assembly time is roughly one hour..
Notes
After testing various combinations of plywood and available sheetrock, and their insulating values, I settled on aluminum foil wrapped cardboard as the most accessible and affordable. However, this does not diminish the quality of insulating ability provided.
Assembly Instructions
- Cut the cardboard to ensure a tight fit, and wrap in aluminum foil.
- Apply magnets to cardboard panels and delta wood.