Shan Zhong (talk | contribs) No edit summary |
Shan Zhong (talk | contribs) |
||
Line 2: | Line 2: | ||
=='''Introduction'''== | =='''Introduction'''== | ||
The normal hot end holder just has one fan and the cooling air always blows from one side. One fan design makes the printed part cool down unevenly and there is always one side has more tendency to curve. This design improves the cooling system by redesigning the hot end holder and fixing three fans on it. Three fans are on the u, v, w sides respectively so the cooling air can be blew from three different directions and cool the printed part more consistently. | The normal hot end holder just has one fan and the cooling air always blows from one side. One fan design makes the printed part cool down unevenly and there is always one side has more tendency to curve. This design improves the cooling system by redesigning the hot end holder and fixing three fans on it. Three fans are on the u, v, w sides respectively so the cooling air can be blew from three different directions and cool the printed part more consistently. | ||
Original Author: [[User:Shan Zhong]] | |||
[[ImageHot end holder.JPG|center|400px]] | |||
=='''Design'''== | =='''Design'''== |
Revision as of 03:48, 8 December 2016
Introduction
The normal hot end holder just has one fan and the cooling air always blows from one side. One fan design makes the printed part cool down unevenly and there is always one side has more tendency to curve. This design improves the cooling system by redesigning the hot end holder and fixing three fans on it. Three fans are on the u, v, w sides respectively so the cooling air can be blew from three different directions and cool the printed part more consistently.
Original Author: User:Shan Zhong
Design
Printing
Instruction
Link to the files
[[Category:]] [[Category:]]