Line 18: | Line 18: | ||
==Calibration== | ==Calibration== | ||
Machine should be precalibrated to approximately 1.0 kW/sq. meter, however this is only within about two inches away from the front of the solar sim. In other words your samples will be getting exactly one sun as long as they are within two inches of the solar simulator. The solar simulator will give less radiation the farther away your samples are from the front of the machine. | |||
Link to specs: | Link to specs: | ||
*http://www.newport.com/50---200-W-Research-Arc-Lamp-Sources/378039/1033/info.aspx | *http://www.newport.com/50---200-W-Research-Arc-Lamp-Sources/378039/1033/info.aspx | ||
[[category:MOST methods]] | [[category:MOST methods]] |
Revision as of 15:27, 20 June 2014
What is it?
Turning on the machine
Flip the power switch to on To turn on the lamp:
- Press the lamp start button
To turn off the lamp:
- Press the lamp off button
-
Turn switch on power supply to turn machine on
-
display when lamp is off
-
display when lamp is on
-
lamp buttons
Calibration
Machine should be precalibrated to approximately 1.0 kW/sq. meter, however this is only within about two inches away from the front of the solar sim. In other words your samples will be getting exactly one sun as long as they are within two inches of the solar simulator. The solar simulator will give less radiation the farther away your samples are from the front of the machine.
Link to specs: