(2 intermediate revisions by the same user not shown) | |||
Line 3: | Line 3: | ||
'''What is it?''' | '''What is it?''' | ||
==Solar sim unit== | |||
<gallery> | |||
Image:solar_sim_powersupply.jpg|power supply | |||
Image:solar_sim_lens.jpg|lens | |||
</gallery> | |||
==Turning on the machine== | ==Turning on the machine== | ||
Flip the power switch to on | Flip the power switch to on | ||
Line 15: | Line 21: | ||
Image:solar_sim_lampon.jpg|display when lamp is on | Image:solar_sim_lampon.jpg|display when lamp is on | ||
Image:solar_sim_buttons.jpg|lamp buttons | Image:solar_sim_buttons.jpg|lamp buttons | ||
Image:solar_sim_sampleholder|sample holder | |||
</gallery> | </gallery> | ||
==Calibration== | ==Calibration== | ||
Machine should be precalibrated to approximately 1.0 kW/sq. meter, however this is only within about two inches away from the front of the solar sim. In other words your samples will be getting exactly one sun as long as they are within two inches of the solar simulator. The solar simulator will give less radiation the farther away your samples are from the front of the machine. | Machine should be precalibrated to approximately 1.0 kW/sq. meter, however this is only within about two inches away from the front of the solar sim. In other words your samples will be getting exactly one sun as long as they are within two inches of the solar simulator. The solar simulator will give less radiation the farther away your samples are from the front of the machine. | ||
<gallery> | |||
Image:solar_sim_samplelens.jpg|Approximate distance from lense to get exactly 1 sun | |||
</gallery> | |||
Link to specs: | Link to specs: | ||
*http://www.newport.com/50---200-W-Research-Arc-Lamp-Sources/378039/1033/info.aspx | *http://www.newport.com/50---200-W-Research-Arc-Lamp-Sources/378039/1033/info.aspx | ||
[[category:MOST methods]] | [[category:MOST methods]] |
Revision as of 15:49, 20 June 2014
What is it?
Solar sim unit
-
power supply
-
lens
Turning on the machine
Flip the power switch to on To turn on the lamp:
- Press the lamp start button
To turn off the lamp:
- Press the lamp off button
-
Turn switch on power supply to turn machine on
-
display when lamp is off
-
display when lamp is on
-
lamp buttons
-
sample holder
Calibration
Machine should be precalibrated to approximately 1.0 kW/sq. meter, however this is only within about two inches away from the front of the solar sim. In other words your samples will be getting exactly one sun as long as they are within two inches of the solar simulator. The solar simulator will give less radiation the farther away your samples are from the front of the machine.
-
Approximate distance from lense to get exactly 1 sun
Link to specs: