Jayantchalke (talk | contribs) |
Jayantchalke (talk | contribs) |
||
Line 23: | Line 23: | ||
== Key Points For Printing== | == Key Points For Printing== | ||
# Calibrate you Z axis according to the thickness of your T-Shirt | # Calibrate you Z axis according to the thickness of your T-Shirt | ||
# | #Leave like 0.5 mm of Clearance between the tip of the nozzle and the T-Shirt so that it doesn't drag along while printing | ||
== Cost savings== | == Cost savings== |
Revision as of 15:33, 9 December 2014
3D Printed Custom T-shirt
Project developed by [User:Jayantchalke]
Abstract
- Print Out Custom T-Shirts at your Home right on your Desk from an Amazing 3D Printer!
Bill of Materials
- PLA Filament ~ 22$ [1]
Tools
- MOST Delta RepRap or similar RepRap 3-D printer
- Create You Own Designs or Just download it from thingiverse [2] or similar
Skills and Knowledge Necessary to Make the OSAT
- MY4777/MY5777/EE4777/EE5777: Open-source 3-D printing.
- OpenSCAD
- CURA
Key Points For Printing
- Calibrate you Z axis according to the thickness of your T-Shirt
- Leave like 0.5 mm of Clearance between the tip of the nozzle and the T-Shirt so that it doesn't drag along while printing
Cost savings
- a commercially available T-shirt would cost somewhere between $5.99 to $24.99
- 3D Printed would cost less than a Buck depending upon your custom designs/ Prints.
- Some commercially Available Sites[3]
- This is almost 98% Cost savings.
</nowiki>