No edit summary |
No edit summary |
||
Line 78: | Line 78: | ||
*Can print thin film CIGS Solar cells in existing 10<sup>− 4</sup> vacuum chamber with existing electron gun | *Can print thin film CIGS Solar cells in existing 10<sup>− 4</sup> vacuum chamber with existing electron gun | ||
<ref>http://reprap.org/wiki/MetalicaRap </ref> | <ref>http://reprap.org/wiki/MetalicaRap </ref> | ||
="DESIGN OF AN ELECTROMAGNETIC ACTUATOR SUITABLE FOR PRODUCTION BY RAPID PROTOTYPING"= | |||
*motor capable of being produced by RepRap, capable of printing with conductive materials | |||
*print all electronic componenets of a 3D printer | |||
<ref>Moses, Matthew S., and Gregory S. Chirikjian. "DESIGN OF AN ELECTROMAGNETIC ACTUATOR SUITABLE FOR PRODUCTION BY RAPID PROTOTYPING." Proceedings of the ASME 2011 International Design Engineering Technical Conferences &Computers and Information in Engineering Conference. N.p., 31 Aug. 2011. Web. 14 June 2012. <https://custer.lcsr.jhu.edu/wiki/images/0/08/DETC2011-48602.pdf>. | |||
</ref> | |||
="3-D Printing of Open Source Appropriate Technologies for Self-Directed Sustainable Development"= | |||
*The ability to incorporate recycled metals into printed items would allow for the printing | |||
of mechanically reinforced objects as well as switches and other electrically conductive applications | |||
*Fab@Home can print with conductive paste | |||
*Fab@Home can print electronics | |||
<ref> | |||
Pearce, J. M., C. M. Blair, K. J. Laciak, R. Andrews, A. Nosrat, and I. Zelenika-Zovko. "3-D Printing of Open Source Appropriate Technologies for Self-Directed Sustainable Development." Journal of Sustainable Development, Dec. 2010. Web. 14 June 2012. <http://www.ccsenet.org/journal/index.php/jsd/article/view/6984/6385>. | |||
</ref> | |||
="Towards cyclic fabrication systems for modular robotics and rapid manufacturing"= | |||
*Extruder that extrudes low melting temp alloys into plastic parts | |||
*The Reprap group has demonstrated formation of circuit wiring by extruding metal into plastic parts | |||
*The extruder consists of a heated copper nozzle and a motorized syringe pump | |||
*Used to print metal coil plates | |||
<ref>Moses, Matt, Hiroshi Yamaguchi, and Gregory S. Chirikjian. "Towards Cyclic Fabrication Systemsfor Modular Robotics and Rapid Manufacturing." John Hopkins University, n.d. Web. 14 June 2012. <http://diyhpl.us/~bryan/papers2/Towards%20cyclic%20fabrication%20systems%20for%20modular%20robotics%20and%20rapid%20manufacturing.pdf>. | |||
</ref> | |||
="Rapid Prototyped Electronic Circuits"= | |||
*create electrical circuits by using casting channels for low melting-point alloys within components | |||
*Wood's alloy has a lower melting point (70 °C) than the ABS used for RP components | |||
*able to replicate full printer | |||
*print circuits | |||
<ref>E. Sells and A. Bowyer, “Rapid prototyped electronic circuits,” | |||
University of Bath, Tech. Rep., Nov. 2004. [Online]. Available: | |||
http://staff.bath.ac.uk/ensab/replicator/Downloads/report-01-04.doc | |||
</ref> | |||
=References= | =References= | ||
<references/> | <references/> |
Revision as of 18:56, 14 June 2012
Introduction
This page comprises a literature review of 3D printing with electrically conductive materials. Information is taken straight from sources, as credited.
Search Phrases
- Conductive 3D printing
- Conductive 3D printing polymers
- Conductive additive layer manufacturing
"Rapid prototyping of electrically conductive components using 3Dprinting technology"
- made of plaster-based powder bound layer-by-layer by an inkjet printing of a liquid binder
- impregnated by a dispersion of carbon nanofibers (CNF) in epoxy resin
- Surface resistivity of the model below 800 Ω/sq has been obtained when impregnated by a mixture containing less than 4 wt.% CNF. Volume resistivity of the molded and hardened CNF dispersion used for model impregnation have also been measured and a value less than 200 Ω cm has been obtained at 3 wt.% CNF content
- carbon-black or metal powders increases the viscosity of the infiltrant so that it is not able to impregnate the 3D model structure
- the average diameter of the fibers is 100 nm and typical length is 50–200 μm
"Inkjet Printing of Narrow Conductive Tracks on Untreated Polymeric Substrates"
- Small conductive tracks are created by direct inkjet-printing
- Ink with 30 nm silver particles onto flexible and transparent untreated polyarylate foils
- Diameter as narrow as 40 micrometers
- Conductivity is 13 to 23 % that of bulk silver
- may be applied in plastic electronics
"Gravure printing of conductive particulate polymer inks on flexible substrates"
- conductive lines on paper and plastic films
- inks contained metal particles in an organic medium and were cured in temperatures of 70–120 °C
- A printed resistance down to ∼50 mΩ/□ was obtained, with conductor lines 4–7 μm thick
- thick ink layer is needed for high conductivity
- printed antennas and inductors
"Reprinting the Telegraph:Replicating the Vail Register Using Multi-materials 3D Printing"
- Used SFF to fabricate a complete, active electromechanical system (telegraph)
- produced a complete electromagnet:stacked layers of 20 turns each, total resistance of 11.4Ω
"SpoolHead(RepRap Wiki)"
- Reprap toolhead for printing with metal wire
- Made to print with nichrome wire to replicate RepRap electrical components
"Materials Science(RepRap Wiki)"
- ConductiveMaterials can serve as CircuitBoard traces, wiring, antennae, electro magnets, and faraday cages, along with actual electrical components such as capacitors, resistors, and inductors
- Work done with printing metals and conductive filler
"April 12, 2012 RepRap Blog"
- one Bowden extruder (for the plastic) and one "standard" extruder for the metal
- Arduino compatible Sanguino board
- plastic was printed before dropping in pre-tinned components and finally printing the metal tracks
"Metalia RepRap"
- electron beam based printer (an electron gun and vacuum chamber are the primary requirements for thin film solar cell printers)
- Fully functional parts directly from standard metals
- For most parts it may offer dimensionally finished metal parts IT grade 7
- Good metallurgy on all common metals (Melting process rather than sintering process ensures near 100% of solid material)
- Closed loop system
- Self measurement of finished part tolerances.
- May offer automatic self correction (subtractive machining steps during build process and feedback with compensation used in the additive process).
- Can print thin film CIGS Solar cells in existing 10− 4 vacuum chamber with existing electron gun
"DESIGN OF AN ELECTROMAGNETIC ACTUATOR SUITABLE FOR PRODUCTION BY RAPID PROTOTYPING"
- motor capable of being produced by RepRap, capable of printing with conductive materials
- print all electronic componenets of a 3D printer
"3-D Printing of Open Source Appropriate Technologies for Self-Directed Sustainable Development"
- The ability to incorporate recycled metals into printed items would allow for the printing
of mechanically reinforced objects as well as switches and other electrically conductive applications
- Fab@Home can print with conductive paste
- Fab@Home can print electronics
"Towards cyclic fabrication systems for modular robotics and rapid manufacturing"
- Extruder that extrudes low melting temp alloys into plastic parts
- The Reprap group has demonstrated formation of circuit wiring by extruding metal into plastic parts
- The extruder consists of a heated copper nozzle and a motorized syringe pump
- Used to print metal coil plates
"Rapid Prototyped Electronic Circuits"
- create electrical circuits by using casting channels for low melting-point alloys within components
- Wood's alloy has a lower melting point (70 °C) than the ABS used for RP components
- able to replicate full printer
- print circuits
References
- ↑ J. Czyżewski, P. Burzyński, K. Gaweł, J. Meisner, Rapid prototyping of electrically conductive components using 3D printing technology, Journal of Materials Processing Technology, Volume 209, Issues 12–13, 1 July 2009, Pages 5281-5285, ISSN 0924-0136, 10.1016/j.jmatprotec.2009.03.015. (http://www.sciencedirect.com/science/article/pii/S092401360900106X)
- ↑ van Osch, T. H. J., Perelaer, J., de Laat, A. W. M. and Schubert, U. S. (2008), Inkjet Printing of Narrow Conductive Tracks on Untreated Polymeric Substrates. Adv. Mater., 20: 343–345. doi: 10.1002/adma.200701876
- ↑ Marko Pudas, Niina Halonen, Päivi Granat, Jouko Vähäkangas, Gravure printing of conductive particulate polymer inks on flexible substrates, Progress in Organic Coatings, Volume 54, Issue 4, 1 December 2005, Pages 310-316, ISSN 0300-9440, 10.1016/j.porgcoat.2005.07.008. (http://www.sciencedirect.com/science/article/pii/S0300944005001700)
- ↑ Alonso, Matthew P., Evan Malon e, Francios C. Moon, and Hod Lipson. "Reprinting the Telegraph:Replicating the Vail Register Using Multi-materials 3D Printing." Cornell.edu. Web. 30 May 2012. <http://creativemachines.cornell.edu/sites/default/files/SFF09_Alonso.pdf>.
- ↑ "SpoolHead." - RepRapWiki. Web. 30 May 2012. <http://reprap.org/wiki/SpoolHead>.
- ↑ "MaterialsScience." - RepRapWiki. Web. 30 May 2012. <http://reprap.org/wiki/MaterialsScience>.
- ↑ http://blog.reprap.org/
- ↑ http://reprap.org/wiki/MetalicaRap
- ↑ Moses, Matthew S., and Gregory S. Chirikjian. "DESIGN OF AN ELECTROMAGNETIC ACTUATOR SUITABLE FOR PRODUCTION BY RAPID PROTOTYPING." Proceedings of the ASME 2011 International Design Engineering Technical Conferences &Computers and Information in Engineering Conference. N.p., 31 Aug. 2011. Web. 14 June 2012. <https://custer.lcsr.jhu.edu/wiki/images/0/08/DETC2011-48602.pdf>.
- ↑ Pearce, J. M., C. M. Blair, K. J. Laciak, R. Andrews, A. Nosrat, and I. Zelenika-Zovko. "3-D Printing of Open Source Appropriate Technologies for Self-Directed Sustainable Development." Journal of Sustainable Development, Dec. 2010. Web. 14 June 2012. <http://www.ccsenet.org/journal/index.php/jsd/article/view/6984/6385>.
- ↑ Moses, Matt, Hiroshi Yamaguchi, and Gregory S. Chirikjian. "Towards Cyclic Fabrication Systemsfor Modular Robotics and Rapid Manufacturing." John Hopkins University, n.d. Web. 14 June 2012. <http://diyhpl.us/~bryan/papers2/Towards%20cyclic%20fabrication%20systems%20for%20modular%20robotics%20and%20rapid%20manufacturing.pdf>.
- ↑ E. Sells and A. Bowyer, “Rapid prototyped electronic circuits,” University of Bath, Tech. Rep., Nov. 2004. [Online]. Available: http://staff.bath.ac.uk/ensab/replicator/Downloads/report-01-04.doc