Figure 1: The Imagineers (from left to right):그림 1: 이매진자(왼쪽에서 오른쪽으로): Vincent Hurtado, Shaela Hogue, Erin Pyne, Oscar Bermudez빈센트 후르타도, 샤엘라 호그, 에린 페인, 오스카 버뮤데즈

Abstract추상적인

The purpose of this project is to create a wedging table that will be used in Zane Middle School's Art class.이 프로젝트의 목적은 제인 중학교의 미술 수업에 사용될 웨징 테이블을 만드는 것입니다. The Imagineers team created and designed a wedging table to provide a reliable and efficient area to wedge clay.Imaginers 팀은 쐐기형 점토에 안정적이고 효율적인 영역을 제공하기 위해 쐐기형 테이블을 만들고 설계했습니다. The Imagineers was formed as part of Cal Poly Humboldt's Engineering 215: Introduction to Design class, taught by Camille Penny.Imaginers는 Cal Poly Humboldt의 Engineering 215: Introduction to Design class의 일부로 결성되었으며, Camille Penny가 가르쳤습니다.

Background배경

Cal Poly Humboldt's Engineering 215: Introduction to Design provides its class with experience in design projects, team building, and communication skills.Cal Poly Humboldt의 Engineering 215: Introduction to Design은 디자인 프로젝트, 팀 구성 및 커뮤니케이션 기술에 대한 경험을 학급에 제공합니다. The Imagineers team was formed as part of an assignment for Engineering 215.Imaginers 팀은 엔지니어링 215를 위한 임무의 일부로 구성되었습니다. The team's task was to provide Zane Middle School with a wedging table for their Art class.그 팀의 임무는 제인 중학교에 그들의 예술 수업을 위한 웨딩 테이블을 제공하는 것이었습니다. The team members include Oscar Bermudez, Shaela Hogue, Vincent Hurtado, and Erin Pyne.그 팀의 구성원들은 오스카 버뮤데즈, 샤엘라 호그, 빈센트 후르타도, 그리고 에린 페인을 포함합니다.

Problem Statement문제 설명

The objective of this project was to provide Zane Middle School with a portable area to wedge clay.이 프로젝트의 목적은 제인 중학교에 웨지 클레이를 넣을 수 있는 휴대용 공간을 제공하는 것이었습니다. The Imagineers designed a wedging table that can be portable and is also able to be stationary when in use, the table also provides storage and a side ledge to place dry clay.Imaginers는 휴대가 가능하고 사용 중에도 고정이 가능한 웨징 테이블을 설계했습니다. 테이블은 또한 저장고와 마른 점토를 놓을 수 있는 사이드 에지를 제공합니다.

Criteria기준

Below is a table listing and defining the criteria that was considered when choosing the projects' final design.아래 표는 프로젝트의 최종 설계를 선택할 때 고려된 기준을 나열하고 정의한 것입니다.

Criterion기준Definitions정의들
Safety안전.The table should not contain any toxic chemicals or sharp metal.테이블에는 독성 화학 물질이나 날카로운 금속이 들어 있어서는 안 됩니다.
Sturdiness강건함The table should not teeter over, wood and metal must be securely attached throughout the table, and the locking casters must be able to remain locked.테이블이 비틀거리지 않아야 하며, 나무와 금속이 테이블 전체에 단단히 부착되어 있어야 하며, 잠금 캐스터는 잠금 상태를 유지할 수 있어야 합니다.
Portability휴대성The table should move, and be able to lock in place.테이블이 이동하고 제자리에 잠글 수 있어야 합니다.
Durability/Longevity내구성/장수The table should need little maintenance, and should be able to withstand minor wear and tear.테이블은 유지보수가 거의 필요하지 않고 경미한 마모나 손상에도 견딜 수 있어야 합니다.
Cost비용.The cost for materials that compose the table cannot exceed the amount of $300; this includes $75 per group member.표를 구성하는 재료 비용은 300달러를 초과할 수 없습니다. 여기에는 그룹 구성원 한 명당 75달러가 포함됩니다.
Environmental Impact/Sustainability환경영향/지속가능성Reusable items would be preferable to construct the table.테이블을 구성하려면 재사용 가능한 항목이 더 좋습니다.
Aesthetics미학The table needs to be aesthetically appealing.그 테이블은 미적으로 매력적이어야 합니다.

Description of final project최종 프로젝트 설명

Figure 2: Final design hand drawn by Shaela Hogue그림 2: Shaela Hogue가 그린 최종 디자인 핸드
Figure 3: Final design in ACAD by Shaela Hogue그림 3: Shaela Hogue의 ACAD 최종 설계

Costs비용.

Figure 4: Design Cost in hours그림 4: 설계 비용(시간)


Below and is a table showing the cost of the materials used along with the grand total (the total does not include the value of materials that were donated).아래 표는 총계와 함께 사용된 재료의 비용을 보여줍니다(총계에는 기부된 재료의 가치가 포함되지 않음). Figure 4 shows the amount of hours spent in each phase of the design project along with the total amount of hours.그림 4는 설계 프로젝트의 각 단계에서 소요된 시간과 총 시간을 보여줍니다.

Material재료.Source원천Cost ($)비용($)QuantityTotal ($)합계($)
Aluminum posts알루미늄 기둥Arcata Scrap아르카타 스크랩7.50215.00
Casters캐스터즈Ace Hardware에이스 하드웨어7.99431.96
Hinges경첩Ace Hardware에이스 하드웨어5.39421.56
Micellaneous Hardware & etc.마우스엘리니어 하드웨어 등Ace Hardware에이스 하드웨어NA132.76
Screws for Casters캐스터용 나사Ace Hardware에이스 하드웨어.22163.52
Screws for plaster box석고 상자용 나사Ace Hardware에이스 하드웨어NA16NA
Wood나무Donated by Almquist Lumber알퀴스트 목재에서 기증NA2 boards, 2 sheets of plywood보드 2장, 합판 2장NA
Wood glue나무풀Donated by Almquist Lumber알퀴스트 목재에서 기증NA1NA
Plaster of paris파리의 석고Client고객21.00363.00
Total Cost총 비용$168$168

Testing Results테스트 결과

The original design that was chosen was modified along the way to improve any of the obstacles that were encountered.원래 선택된 설계는 마주친 장애물을 개선하기 위해 수정되었습니다. Some of the things that were adjusted were the replacement of shelves instead of drawers.조정된 것들 중 일부는 서랍 대신 선반을 교체하는 것이었습니다. An implementation of a latch on the caster mechanism improved its portability capability.캐스터 메커니즘에 래치를 구현하여 이동성 기능이 향상되었습니다.

How to build구축 방법

How To Build Wedge and a Ledge쐐기와 쐐기를 만드는 방법
Image이미지Steps스텝
ImagineersWedge1.5.jpg
Step 1 Cutting the aluminum tubing for legs.1단계 다리용 알루미늄 튜브 절단
ImagineersWedge2.jpg
Step 2 Drill pilot holes where necessary into the aluminum legs.2단계 알루미늄 다리에 필요한 경우 파일럿 구멍을 뚫습니다.
ImagineersWedge3-5.jpg
Step 3 Assemble the wood frame and shelving.3단계 목재 프레임과 선반을 조립합니다.
ImagineersWedge4.5.JPG
Step 4 To keep the wood frame from having water damage issues, caulking was used on the seams and a sealant was used on the wood surfaces.4단계: 목재 프레임에 물 손상 문제가 발생하지 않도록 솔기에 코킹을 사용하고 목재 표면에 실란트를 사용합니다. We used a salad bowl finishing stain to seal the wood.우리는 나무를 밀봉하기 위해 샐러드 그릇 마감 얼룩을 사용했습니다.
ImagineersWedge5.JPG
Step 5 Drill pilot holes where necessary to attach aluminum legs.5단계 알루미늄 다리를 부착하기 위해 필요한 곳에 파일럿 구멍을 뚫습니다.
ImagineersWedge7.JPG
Step 6 Assemble and attach the caster mechanism.6단계 캐스터 메커니즘을 조립하고 부착합니다.
ImagineersWedge8.jpg
Step 7 Attach the legs to the top and shelves.7단계 다리를 상단과 선반에 부착합니다.
Caption
Step 8 Mix plaster and pour letting it set.8단계는 석고를 섞은 후 붓기 시작합니다.
Caption
Step 9 Deliver the wedging table to the client.9단계 고객에게 웨징 테이블을 전달합니다.

Next Steps다음 단계

The "Wedge and a Ledge" design will be placed in the art room storage area while it is not in use."Wedge and a Ledge" 디자인은 사용하지 않는 동안 아트룸 보관 공간에 배치됩니다. The table will remain stationary while the caster locking mechanism is disengaged.테이블은 캐스터 잠금 메커니즘이 해제된 동안 정지 상태로 유지됩니다. When the table needs to be used, the mechanism must be engaged for the table to be rolled to the designated wedging area.테이블을 사용해야 할 경우 지정된 웨징 영역으로 테이블을 롤링하기 위해 메커니즘이 체결되어야 합니다. Once in that area, the mechanism can be disengaged so that the table remains stationary during use.이 영역에 들어가면 메커니즘을 해제하여 테이블이 사용 중에 정지 상태를 유지할 수 있습니다.

Results결과.

As of Monday, 2 May 2016, the "Wedge and a Ledge" design was completed and is ready for use by Ken Weiderman and his students.2016년 5월 2일 월요일 현재, "웨지 앤 어 레지" 디자인이 완료되었으며 켄 와이더먼과 그의 학생들이 사용할 준비가 되어 있습니다. We successfully demonstrated our constructed design to judges, our peers, and our instructor during a presentation to Zane Middle School.우리는 제인 중학교에서 발표하는 동안 우리의 구성된 디자인을 심사위원들, 동료들, 그리고 강사들에게 성공적으로 시연했습니다.

Group Member Pages그룹 구성원 페이지

References레퍼런스

  • Bayer, M. F. (1922).바이엘, M. F. (1922). "Caster Lock.""캐스터 락" United States Patent Office, US1428932 A.미국 특허청, US1428932 A.
  • Bergeson, Lynn L. (2014).Bergeson, Lynn L. (2014). "FTC's Recent Enforcement Cases for Misleading Recycled Content Claims.""재활용 콘텐츠 주장을 오도한 공정위의 최근 시행 사례" Regulatory Developments, <http://web.archive.org/web/20201208123718/https://www.acta group.com/regulatory-developments/entry/ftcs-recent-enforcement-cases-for-misleading-recycled-content-claims> (Feb. 20, 2016)규제 개발, <http://web.archive.org/web/20201208123718/https ://www.acta group.com/regulatory-developments/entry/ftcs-recent-enforcement-cases-for-misleading-recycled-content-claims > (2016년 2월 20일)
  • Boesel, J., Richey, J (1993).Boesel, J., Richey, J (1993). Machines on Wheels, The Taunton Press, Newtown, Connecticut.코네티컷주 뉴타운의 '바퀴 위의 기계들'입니다. Caster City. (2016).캐스터 시티. (2016). "Dual Wheel Casters- Total Locking Brake." <http://web.archive.org/web/20201208123718/https://www.castercity.com/specific-app-casters/dual-wheelcasters.htm> (Feb. 23, 2016)"이중 휠 캐스터 - 토탈 락킹 브레이크." <http://web.archive.org/web/20201208123718/https ://www.castercity.com/specific-app-casters/dual-wheelcasters.htm > (2016년 2월 23일)
  • Ceramic Arts Community (2014) "Wedging Table Surface Options – Studio Operations and Making Work." Ceramic Arts Daily Community <http://community.ceramicartsdaily.org/topic/5460- wedging-table-surface-options/> (Feb. 2016).도자예술공동체(2014) "웨딩 테이블 서페이스 옵션 – 스튜디오 운영과 작품 만들기" 도자예술 데일리 커뮤니티 <http://community.ceramicartsdaily.org/topic/5460- wedging-table-surface-making/> (2016. 2.)
  • Ed. Koichi Hirata.편집장 히라타 코이치. (2002).(2002). "Metal Materials." Elementary Knowledge of Metalworking, <http://web.archive.org/web/20170720153532/https://www.nmri.go.jp:80/eng/khirata/metalwork/basic/material/index_e.html> (Feb. 25, 2016)."금속 재료" 금속 작업에 대한 기본 지식, <http://web.archive.org/web/20170720153532/https ://www.nmri.go.jp:80/eng/khirata/metalwork/basic/material/index_e.html > (2016. 2. 25.)
  • Frisch, David, and Susan Frisch, (1998). Metal: Design and Fabrications. N.p.: Whitney Library of Design. Print.
  • Gumpert, Meagan C. (2014.) "Clay Wedging Table - Plaster Mixing Ratios and Guidelines." Clay and Glass Blog of Meagan Chaney Gumpert, <http://web.archive.org/web/20180822234726/https://www.meaganchaneygumpert.com/> (Feb. 20, 2016)
  • Hutchings, Gilbert R., G. Eugene. Martin, and J. Mario Coleman. 1982. Working with Wood. Bloomington IL: McKnight Pub., Print
  • Meier, Eric. (2008). "The Wood Database." The Wood Database, <http://web.archive.org/web/20201208123718/https://ww w.wood-database.com/> (Feb. 24, 2016).
  • Mike. (2014). "Painting furniture – Should I use latex or oil paint? <http://lauerfurniture.com/painting-furniture-should-i-use-latex-or-oil- paint/> (Feb. 23, 2016)
  • Miodownik, Mark. (2013). Stuff Matters. Houghton Mifflin Harcourt Publishing Company. New York, NY.
  • Rockler. (2007). "Wood Stain in a Nutshell" Buzzsaw Blog, <https://www.rockler.com/how-to/wood-stain-in-a-nutshell> (Feb. 24, 2016)
  • Walters, C. (1935). "Tools And Materials: Via: Ceramic Sculpture; The Preparation Of The Clay". The American Magazine of Art, 28(8), 500–502.
  • Walstrom, Emil A., (1942). "Builder's Safety Horse Clamp." United States Patent Office, <https://www.google.com/patents/US2330766> (Feb. 25, 2016).
Cookies help us deliver our services. By using our services, you agree to our use of cookies.