The USB Memory Holder Spare Part is a 3D printed replacement part for a USB memory holder used by OFFTEC, a telecom company in Iraq. It was produced through the Erbil Makerspace, developed for a maker affiliated with the telecom company who made use of the makerspace's fabrication resources.
The part is 3D printed using PLA or ABS plastic filament, with a total production time of approximately 120 minutes.
CAD Image of the first USB Memory Holder Spare PartCAD image of the third USB Memory Holder Spare PartCAD Image of the second USB Memory Holder Spare Part
Open the file using slicing software and prepare for 3D printing. Use the printing settings below (settings may need adjustment depending on the specific 3D printer brand and filament manufacturer used).
Setting
Value
Layer Height (Up Box printer)
0.2 mm
Quality
Normal
Infill Density
13%
Infill Pattern
Cubic
Support
No
Raft
Yes
Production Time
~120 minutes
About the manuals
Field Ready develops manuals to support both the fabrication and safe use of its products. A maker manual provides step-by-step instructions for replicating the design, including materials, tools, and assembly guidance, so that makers in different locations can build the product accurately and consistently. A user manual, where applicable, explains how to properly set up, use, and maintain the product once it is built, helping ensure it performs safely and as intended for the end user. Together, these manuals make the design accessible to both fabricators and the people who ultimately rely on the product.
