Open using a slicing software and prepare for 3D printing. Use printing settings below (settings may change for different 3D printer brands and filament manufacturers)
Layer Height: 0.20 mm
Line Width: 0.35 mm
Wall Thickness: 1.05 mm
Top/Bottom Thickness: 1.0 mm
Infill Density: 60%
Infill Pattern: Flexible 3D
Printing Temperature: 205 °C
Build Plate Temperature: 60 °C
Flow: 100%
Enable Retraction: Yes
Retraction Distance: 6.5 mm
Retraction Speed: 25 mm/s
Print Speed: 70 mm/s
Enable Print Cooling: Yes
Fan Speed: 5%
Support: No
"CERN" is not in the list (CC-BY-SA-4.0, CC-BY-SA-3.0, CC-BY-SA-2.0, CC-BY-NC-SA-4.0, CC-BY-NC-SA-3.0, CC-BY-NC-SA-2.0, CC0-1.0, CERN-OHL-S, MIT, GPL, ...) of allowed values for the "Device hardware license" property.CERN
The Wrist Brace (Small) is a 3D printed brace worn around the wrist to support injury rehabilitation at health posts. It is 3D printed using ABS plastic filament and is designed based on an approach from Global Outreach Doctors (Go Docs), first implemented in the field by Dr. Matthew Markert.
Usage Notes
This brace should be thermoformed before use. For safety, gloves should be worn while thermoforming, and soft cotton cloth should be applied around the wrist for comfort.
Field Ready develops manuals to support both the fabrication and safe use of its products. A maker manual provides step-by-step instructions for replicating the design, including materials, tools, and assembly guidance, so that makers in different locations can build the product accurately and consistently. A user manual, where applicable, explains how to properly set up, use, and maintain the product once it is built, helping ensure it performs safely and as intended for the end user. Together, these manuals make the design accessible to both fabricators and the people who ultimately rely on the product.
