Global Field Ready Portfolio/Nebuliser fitting (barb)
| Type | Medical Device |
|---|---|
| Authors | Mark Mellors |
| Location | The following coordinate was not recognized: Geocoding failed.Haiti |
| Status | Deployed |
| Verified by | Field Ready |
| Years | 2016 |
| Made | Yes |
| Tools | 3D Printer |
| Cost | USD 9.04 |
| Uses | Respiratory Care |
| Manufacturing files | Open using a slicing software and prepare for 3D printing. Use printing settings below (settings may change for different 3D printer brands and filament manufacturers)
Layer Height: 0.20 mm Line Width: 0.35 mm Wall Thickness: 1.05 mm Top/Bottom Thickness: 1.0 mm Infill Density: 99% Infill Pattern: Strong 3D Printing Temperature: 240 °C Build Plate Temperature: 80 °C Flow: 100% Enable Retraction: Yes Retraction Distance: 6.5 mm Retraction Speed: 25 mm/s Print Speed: 60 mm/s Enable Print Cooling: Yes Fan Speed: 5% Support: Yes Support Placement: Everywhere Support Overhang Angel: 60°Build Plate Adhesion Type: Brim |
|---|---|
| Design files | https://www.appropedia.org/File:HL028_Eng_Dwg.zip |
| Schematics | https://www.appropedia.org/File:HL028_CAD.zip |
| Hardware license | "CERN" is not in the list (CC-BY-SA-4.0, CC-BY-SA-3.0, CC-BY-SA-2.0, CC-BY-NC-SA-4.0, CC-BY-NC-SA-3.0, CC-BY-NC-SA-2.0, CC0-1.0, CERN-OHL-S, MIT, GPL, ...) of allowed values for the "Device hardware license" property.CERN |
| Licensor | Field Ready |
| Certifications |  Verify |
The Nebuliser Fitting (Barb) is a 3D printed fitting that allows other gases to be mixed into a nebuliser supply, 3D printed using ABS plastic filament.
More product information
[edit | edit source]| Author Code | HL028 |
| Documentation License | CC-BY-4.0 |
| Start Date | 2016-05-13 |
| End Date | 2016-05-13 |
| Designer | Mark Mellors |
| Maker | Mark Mellors |
| Main Materials | ABS Plastic |
Readiness levels
[edit | edit source]Levels are identified based on this reference: Field Ready Readiness Levels
| Readiness Criteria | Level |
|---|---|
| Field Readiness | 5 |
| Maker Readiness | 4 |
| User Readiness | 4 |
| Tech Readiness | 3 |
| Risk Readiness | 4 |
Manuals
[edit | edit source]
Field Ready develops manuals to support both the fabrication and safe use of its products. A maker manual provides step-by-step instructions for replicating the design, including materials, tools, and assembly guidance, so that makers in different locations can build the product accurately and consistently. A user manual, where applicable, explains how to properly set up, use, and maintain the product once it is built, helping ensure it performs safely and as intended for the end user. Together, these manuals make the design accessible to both fabricators and the people who ultimately rely on the product.
Gallery
[edit | edit source]
| Authors | Field Ready |
|---|---|
| License | CC-BY-SA-4.0 |
| Location | The following coordinate was not recognized: Geocoding failed.Haiti |
| Organizations | Field Ready |
| Ported from | https://airtable.com/appRIACJlkMhNibwR/shrqwRqxAVvaF1q4z/tblJv98WkMMsgDRiE/viwQARb0J2MZZQ2GH (original) |
| Cite as | Field Ready (2026). "Global Field Ready Portfolio/Nebuliser fitting (barb)". Appropedia. Retrieved October 13, 2026. |