Global Field Ready Portfolio/Infant Warmer Corner Piece

▼This page is part of the Global Field Ready Portfolio initiative.

This page is open edit.

[1]

Device data

Design files	https://www.appropedia.org/File:HL009_Eng_Dwg.zip
Schematics	https://www.appropedia.org/File:HL009_CAD.zip
Hardware license	"CERN" is not in the list (CC-BY-SA-4.0, CC-BY-SA-3.0, CC-BY-SA-2.0, CC-BY-NC-SA-4.0, CC-BY-NC-SA-3.0, CC-BY-NC-SA-2.0, CC0-1.0, CERN-OHL-S, MIT, GPL, ...) of allowed values for the "Device hardware license" property.CERN
Licensor	Field Ready
Certifications	US000223 Verify

The Infant Warmer Corner Piece is a 3D printed replacement part for an Air-Shields infant warmer, model IICS. It replaces a damaged or missing corner piece on the warmer housing, helping keep this neonatal equipment in service where a manufacturer replacement part is unavailable.

The part is 3D printed using ABS plastic filament.

Usage Notes

This model is liable to warp slightly during printing, though not on the first layer due to its curved design. It is recommended to print this part on a printer with an enclosed build chamber to reduce warping.

Levels are identified based on this reference: Field Ready Readiness Levels

About the manuals

Field Ready develops manuals to support both the fabrication and safe use of its products. A maker manual provides step-by-step instructions for replicating the design, including materials, tools, and assembly guidance, so that makers in different locations can build the product accurately and consistently. A user manual, where applicable, explains how to properly set up, use, and maintain the product once it is built, helping ensure it performs safely and as intended for the end user. Together, these manuals make the design accessible to both fabricators and the people who ultimately rely on the product.

• File:Https://www.appropedia.org/File:HL009 Image CAD.jpg
• File:Https://www.appropedia.org/File:HL009 Image Catalogue.jpg
• File:Https://www.appropedia.org/File:HL009 Image Use.jpg