Open using a slicing software and prepare for 3D printing. Use printing settings below (settings may change for different 3D printer brands and filament manufacturers)
Layer Height: 0.20 mm
Line Width: 0.35 mm
Wall Thickness: 1.05 mm
Top/Bottom Thickness: 1.0 mm
Infill Density: 60%
Infill Pattern: Strong 3D
Printing Temperature: 240 °C
Build Plate Temperature: 80 °C
Flow: 100%
Enable Retraction: Yes
Retraction Distance: 6.5 mm
Retraction Speed: 25 mm/s
Print Speed: 60 mm/s
Enable Print Cooling: Yes
Fan Speed: 5%
Support: Yes
Support Placement: Touching Buildplate
Support Overhang Angel: 60°
"CERN" is not in the list (CC-BY-SA-4.0, CC-BY-SA-3.0, CC-BY-SA-2.0, CC-BY-NC-SA-4.0, CC-BY-NC-SA-3.0, CC-BY-NC-SA-2.0, CC0-1.0, CERN-OHL-S, MIT, GPL, ...) of allowed values for the "Device hardware license" property.CERN
The Fetoscope (3D Printed) is a 3D printed device used to obtain information about a fetus within the uterus. It was designed while assessing how to supply Health Posts in Nepal with equipment after the earthquake, developed in collaboration with medical practitioners in Nepal, and is 3D printed using ABS plastic filament.
Usage Notes
Print the part in the orientation set in the STL file.
Field Ready develops manuals to support both the fabrication and safe use of its products. A maker manual provides step-by-step instructions for replicating the design, including materials, tools, and assembly guidance, so that makers in different locations can build the product accurately and consistently. A user manual, where applicable, explains how to properly set up, use, and maintain the product once it is built, helping ensure it performs safely and as intended for the end user. Together, these manuals make the design accessible to both fabricators and the people who ultimately rely on the product.
