Publication Number T-114 Go back to AT_Sourcebook

Abstract

This document gives schematic drawings of the assembly and operation of a wind powered water pump. The drawings are accompanied by a list of parts and materials used in the pumps manufacturing.

Publisher

Brace Research Institute
MacDonald College
McGill University
Ste. Anne de Bellevue 800
Quebec, Canada
H9X 1CO
1977

Installation

Assembly

Piston and Piston Rod

Washers and Piston Head

Page 6 - Schematic of Rubber Washer and Steel plate (not to scale)

Page 7 - Schematic of Black Steel Plates

Operation

Parts and Materials

List of Parts and Materials

36 - Nut Bored at 8mm
34 - Round HD-Screw 4mm
32 - Nut 8mm
30 - Iron Rod 8mm
28 - Steel Plate 4mm
26 - Steel Plate 4mm
24 - Rubber Washer 5mm
22 - Rubber Washer 5mm
20 - Black Steel Plate 4mm
18 - Black Steel Plate 4mm
16 - Coupling 90mm/100mm
14 - Galv. Pipe 33mm/42mm
12 - Galv. Pipe 80mm/90mm