Abstract
The objective of this project was to develop a cost-effective composting system that is durable, educational, and safe for children gardeners to use at Catherine L. Zane Middle School in Eureka, CA. As of spring 2017, teachers at Zane had tried to adopt a couple of different composting systems for the garden, but they had to be removed for a variety of reasons. The school requested a compost system that would be educational, safe, and able to accommodate garden waste, woody debris, and organic waste from the cafeteria. The new composter at Zane Middle School is a 2-bin system. The left-side bin is used for depositing fresh organic matter, while the right-side bin houses maturing compost. The structure is painted with weather-resistant paint, which prevents the wood from warping and postpones its decomposition. It is equipped with educational posters, and is lined with hardware cloth to detour rats. Each bin has a front door to encourage ease of access, although the corrugated steel roof is too heavy. In the future, a plastic or wood roof should be used.
Background
Catherine L. Zane Middle School in Eureka, CA focuses their curriculum around science, technology, engineering, art, and math (STEAM), and caters to a diverse group of children. Zane and the Environmental Resources Engineering department at Humboldt State University have a rich history of partnership around the STEM programs. As of spring 2017, the school had tried a couple of composting systems in the past, but were faced with a variety of problems including rats, the need for excessive maintenance, and destructive children, so they removed the compost altogether.
Problem statement and criteria
The objective of this project is to develop a cost-effective composting system that will be strong and safe for the children gardeners to use. This composter will be low-maintenance, simple to use, and will accommodate a variety of garden waste, woody debris, and the occasional organic waste from the cafeteria. The design will ensure the compost is free of pests such as rats and raccoons, and will be sturdy enough to stand up to the test of rowdy middle-schoolers.
Criteria | Constraints | Weight (0-10 high) |
---|---|---|
Pet Resistance | Must be rat-proof | 8 |
Maintenance | Maximum of five hours of maintenance each week | 5 |
Durability | Must not be easily altered by middle-schoolers | 6 |
Safety | Must not be sharp or splintery | 10 |
Educational Value | Includes an appropriate display for middle-schoolers | 9 |
Simplicity | The compost must be accessible to the middle-schoolers | 7 |
Cost | Maximum cost is not to exceed $425 | 4 |
Aesthetics | The aesthetics must agree with those of the garden and the school | 3 |
Description of final project
;
-
The educational poster on the left-side bin.
-
The educational poster on the right-side bin.
-
The base is lined with hardware cloth to keep out rats and allow for an exchange of worms and other decomposers with the environment.
-
The doors fold up when the compost isn't being accessed.
Include a how to use and maintain section. See the how to template below.
Costs
The capital costs for the project stayed within the budget of $425. In total, the number of labor hours spent on the design process, from conceptualization to implementation, was 204.
Quantity | Material | Source | Cost ($) | Total ($) |
---|---|---|---|---|
1 | Corrugated metal, 73 sq. ft. | Arcata Scrap and Salvage | 17 | 17 |
2 | Weather-Resistant Paint (quart) | Ace Hardware | 14.37 | 28.74 |
1 | Wood Glue | Ace Hardware | 3.99 | 3.99 |
2 | Hinge (small) | Ace Hardware | 4.59 | 9.18 |
1 | Hinge (large) | Ace Hardware | 5.99 | 5.99 |
1 | Corner Brace | Ace Hardware | 5.99 | 5.99 |
1 | Mending Brace | Ace Hardware | 7.99 | 7.99 |
2 | Hook & Eye Closures (2-pack) | Ace Hardware | 2.59 | 5.18 |
4 | 2 x 6 (Doug Fir) | Pierson's | 6.00 | 24.00 |
2 | 4 x 8 (Cedar) | Pierson's | 38.89 | 77.78 |
7 | 2 x 2 (Cedar) | Pierson's | 2.00 | 14.00 |
6 | 2 x 4 (cedar) | Pierson's | 3.84 | 23.04 |
1 | 2 x 2 (pine) | Pierson's | 6.98 | 6.98 |
20 | Wood Screws | Pierson's | 0.33 | 7.16 |
1 | Compost Thermometer | Amazon.com | 22.84 | 22.84 |
1 | Galvanized Mesh, 2'x50' 1/4" | Ron's Home and Hardware | 42.37 | 42.37 |
1 | Staples for staple gun | Ace Hardware | 4.49 | 4.49 |
1 | 5/32" Drill bit | Ace Hardware | 2.59 | 2.59 |
1 | 1/4" Nut driver | Ace Hardware | 4.59 | 4.59 |
1 | Gasketed screws | Ace Hardware | 9.29 | 9.29 |
1 | Mending brace | Ace Hardware | 8.59 | 8.59 |
1 | Hinges | Ace Hardware | 13.98 | 13.98 |
1 | Plasti Dip | Ace Hardware | 10.08 | 10.08 |
1 | Poster lamination | Ace Hardware | 19.98 | 19.98 |
1 | 1/2" Hardware cloth | Ace Hardware | 18.98 | 18.98 |
Total Cost | $394.80 |
Testing Results
The first aspect tested was the area in the garden the composter would occupy. This was accomplished using cardboard and duct tape. After the frame was built, the doors were modeled from cardboard to test the accessibility with various sizes of doors.
How to build
Use Template:How_to
Maintenance
The following maintenance tasks should be completed as often as specified to ensure the ongoing success of the composting system [1]. Neglect of any of these tasks could result in the failure of the system to produce desirable soil.
Schedule
Complete the following tasks, as often as specified.
- Daily
- Add fresh compost to the bin on the left
- Make sure the lid and doors remain closed except when working with the compost
- Keep an eye on the temperature of both piles, relate to information found on the informational posters attached to the bins
- Weekly
- Turn the compost thoroughly on a weekly or bi-weekly basis, depending on temperature and moisture levels
- Monthly
- When the soil in the right side bin appears relatively homogeneous in texture, it can be added to the garden
- Move compost from the left-side bin to the right-side bin after the thermophilic phase
- Yearly
- Make sure the hardware cloth remains securely attached to the wood
- Every few years, as necessary
- Replace hinges and hooks
- Repaint/touch up with weather-resistant paint
- Re-apply plasti dip to the edges of the lid
- Replace the compost thermometer
Task | Frequency | Participants |
---|---|---|
Add compost to left-side bin | Daily | Students and teachers |
Move left-side compost to right-side bin | Every few months | Students and teachers |
Turn compost in each bin | Every two weeks | Students and teachers |
Monitor for structural degredation, upkeep as necessary | Ongoing | Teachers |
Add soil from right-side bin to the garden | As available and necessary | Students and teachers |
Instructions
Troubleshooting
This is a list of possible problems one may encounter during regular use, and steps to resolve those problems [2].
Problem | Suggestion |
---|---|
The compost is dripping wet | Add dry browns (like sawdust) and mix thoroughly |
The compost smells like methane | Mix thoroughly, and increase the normal frequency the pile is turned |
The compost is too hot | Turn the pile and moisten if it's dry |
The compost is too cold | Add greens, make sure it's moist but not dripping wet, and increase the size if the pile is small. |
The gopher wire came undone from the wood | Staple the two back together with an industrial stapler (~14 mm staples) |
The Plasti Dip is peeling off | Peel all of the loose ends off, and apply more with a sponge brush. |
Discussion and next steps
The client is very happy with the professional aesthetics and educational value of the final product. Although the roof is functional, it is a little on the heavy side. Currently, a system is being installed to hold the roof secure to the fence, so it won't accidentally fall when it is open.
Suggestions for future changes
Although functional and sized well, the large corrugated metal roof was not ideal for this project. The roof requires too much effort to lift, both because it is so long and because it is heavy. In the future, the lid should be made from two shorter sections (one over each bin), and should be made of a relatively light material.