m (→Parts files) |
m (→Main body) |
||
| Line 32: | Line 32: | ||
Image:Heating_section.jpg|Figure 7:Heating section of pipe. Welded to flanges. | Image:Heating_section.jpg|Figure 7:Heating section of pipe. Welded to flanges. | ||
</gallery> | </gallery> | ||
Shaft Addition: | |||
<gallery> | |||
Image:Shaft addition WPE.jpg|thumb|Shaft extension | |||
<gallery> | |||
Revision as of 18:37, 13 April 2011
Return to Waste plastic extruder.
Parts files
Main body
Manufacturing diagrams will be added below for components of the waste plastic extruder.
Drawings included below are:
- main body assembly drawing
- hopper
- flange
- die
- gear pipe section
- hopper pipe section
- heating pipe section
For this particular extruder, each of these components were fabricated using steel.
-
Figure 1: Assembly diagram of main body including parts list. Part diagrams included below
-
Figure 2: Hopper as constructed for waste plastic extruder. Dimensions can be easily modified as needed.
-
Figure 3: Flange - used to connect various pipe sections together and attach die. Connected with fasteners.
-
Figure 4: Die used to extruder 3mm filament for use with RepRap.
-
Figure 5: Gearing section of pipe. Welded to flanges.
-
Figure 6: Hopper section of pipe. Welded to flanges.
-
Figure 7:Heating section of pipe. Welded to flanges.
Shaft Addition: <gallery> Image:Shaft addition WPE.jpg|thumb|Shaft extension <gallery>