m (→Parts files: slight format change) |
m (→Parts files) |
||
| Line 24: | Line 24: | ||
<gallery> | <gallery> | ||
Image:Main_body_assembly.jpg | Image:Main_body_assembly.jpg|Figure 1: Assembly diagram of main body including parts list. Part diagrams included below | ||
Image:hopper.jpg|Figure 2: Hopper as constructed for waste plastic extruder. Dimensions can be easily modified as needed. | Image:hopper.jpg|Figure 2: Hopper as constructed for waste plastic extruder. Dimensions can be easily modified as needed. | ||
Image:Flange.jpg|Figure 3: Flange - used to connect various pipe sections together and attach die. Connected with fasteners. | Image:Flange.jpg|Figure 3: Flange - used to connect various pipe sections together and attach die. Connected with fasteners. | ||
Revision as of 17:42, 12 April 2011
Return to Waste plastic extruder.
Parts files
Main body
Manufacturing diagrams will be added below for components of the waste plastic extruder.
Drawings included below are:
- main body assembly drawing
- hopper
- flange
- die
- gear pipe section
- hopper pipe section
- heating pipe section
For this particular extruder, each of these components were fabricated using steel.
-
Figure 1: Assembly diagram of main body including parts list. Part diagrams included below
-
Figure 2: Hopper as constructed for waste plastic extruder. Dimensions can be easily modified as needed.
-
Figure 3: Flange - used to connect various pipe sections together and attach die. Connected with fasteners.
-
Figure 4: Die used to extruder 3mm filament for use with RepRap.
-
Figure 5: Gearing section of pipe. Welded to flanges.
-
Figure 6: Hopper section of pipe. Welded to flanges.
-
Figure 7:Heating section of pipe. Welded to flanges.
