m (cats)
m (→‎Main body: formatting)
Line 22: Line 22:


For this particular extruder, each of these components were fabricated using steel.
For this particular extruder, each of these components were fabricated using steel.
[[Image:hopper.jpg|thumb|Figure 2: Hopper as constructed for waste plastic extruder. Dimensions can be easily modified as needed.]]
 
[[Image:Flange.jpg|thumb|Figure 3: Flange - used to connect various pipe sections together and attach die. Connected with fasteners.]]
{| style="background: transparent; margin: auto;"
[[Image:Die.jpg|thumb|Figure 4: Die used to extruder 3mm filament for use with RepRap.]]
 
[[Image:gear section.jpg|thumb|Figure 5: Gearing section of pipe. Welded to flanges.]]
|[[Image:hopper.jpg|thumb|Figure 2: Hopper as constructed for waste plastic extruder. Dimensions can be easily modified as needed.]]
[[Image:Hopper section.jpg|thumb|Figure 6: Hopper section of pipe. Welded to flanges.]]
|[[Image:Flange.jpg|thumb|Figure 3: Flange - used to connect various pipe sections together and attach die. Connected with fasteners.]]
[[Image:Heating_section.jpg|thumb|Figure 7:Heating section of pipe. Welded to flanges.]]
|[[Image:Die.jpg|thumb|Figure 4: Die used to extruder 3mm filament for use with RepRap.]]
 
|}
 
{| style="background: transparent; margin: auto;"
 
|[[Image:gear section.jpg|thumb|Figure 5: Gearing section of pipe. Welded to flanges.]]
|[[Image:Hopper section.jpg|thumb|Figure 6: Hopper section of pipe. Welded to flanges.]]
|[[Image:Heating_section.jpg|thumb|Figure 7:Heating section of pipe. Welded to flanges.]]
|}

Revision as of 21:43, 11 April 2011

This page was developed by the Queen's University Applied Sustainability Research Group.

Return to Waste plastic extruder.

Parts files

Main body

Manufacturing diagrams will be added below for components of the waste plastic extruder.

Drawings included to right are:

Figure 1: Assembly diagram of main body including parts list. Part diagrams included below

.

  • main body assembly drawing
  • hopper
  • flange
  • die
  • gear pipe section
  • hopper pipe section
  • heating pipe section

For this particular extruder, each of these components were fabricated using steel.

Figure 2: Hopper as constructed for waste plastic extruder. Dimensions can be easily modified as needed.
Figure 3: Flange - used to connect various pipe sections together and attach die. Connected with fasteners.
Figure 4: Die used to extruder 3mm filament for use with RepRap.
Figure 5: Gearing section of pipe. Welded to flanges.
Figure 6: Hopper section of pipe. Welded to flanges.
Figure 7:Heating section of pipe. Welded to flanges.
Retrieved from "https://www.appropedia.org/w/index.php?title=Waste_plastic_extruder:_Files&oldid=166441"
Cookies help us deliver our services. By using our services, you agree to our use of cookies.