| Line 10: | Line 10: | ||
== Problem statement and criteria == | == Problem statement and criteria == | ||
The objective of this design project is to produce a conductivity probe for the use of Six Rivers Charter School in Arcata, CA. The chemistry department will use the probe to measure the conductivity of various liquids, as well as use the probe as a teaching mechanism for students. Therefore, it is essential to design a conductivity probe that is not only accurate, but that also facilitates learning for the students, can be handled by inexperienced users without easily breaking, and can provide easy usability. The goals and criteria for this design will be determined by the clientele at Six Rivers Charter School. | |||
== Description of final project == | == Description of final project == | ||
Revision as of 01:22, 18 November 2019
Abstract
One paragraph summary of your project from background to discussion and next steps.
There should be an image near the top.
Background
Problem statement and criteria
The objective of this design project is to produce a conductivity probe for the use of Six Rivers Charter School in Arcata, CA. The chemistry department will use the probe to measure the conductivity of various liquids, as well as use the probe as a teaching mechanism for students. Therefore, it is essential to design a conductivity probe that is not only accurate, but that also facilitates learning for the students, can be handled by inexperienced users without easily breaking, and can provide easy usability. The goals and criteria for this design will be determined by the clientele at Six Rivers Charter School.
Description of final project
Photos and descriptions. Use gallery (https://www.appropedia.org/Help:Images#Galleries (Links to an external site.)).
Include a how to use and maintain section. See the how to template below.
Prototyping
Use a gallery of prototyping photos and lessons learned.
Costs
Use Help:Table_examples#Cost_Table.
| Quantity | Material | Source | Cost ($) | Total ($) |
|---|---|---|---|---|
| 2 | Bolt | Aces | 0.65 | 1.42 |
| 4 | Washer | Aces | 0.23 | 1.00 |
| 2 | Nut | Aces | 0.25 | 0.54 |
| 1 | Acrylic Knife | Amazon | 7.99 | 8.67 |
| 1 | Acrylic Sheet | Aces | 14.99 | 16.39 |
| Total Cost | $246.60 | |||
Testing Results
How to build
Use Template:How_to
Maintenance
Introduce this maintenance section.
Schedule
- Daily
- After each use unplug the conductivity probe and wipe down any water with a towel.
Instructions
This is how to maintain. The step by step how to template {{How to}} is most likely best for this part.
Troubleshooting
This is only how to troubleshoot basic operation. For complex issues, say contact Marco at mag233@humboldt.edu.
| Problem | Suggestion |
|---|---|
| Example issue | Example solution or suggestion |
| Does not turn on | Make sure it is plugged in. If issue continues, a new bulb may be needed. |
| Another issue | Et cetera |
Discussion and next steps
Suggestions for future changes
This is where to lay out suggestions for how to make the project function better in the future.
References
See Help:Footnotes for more. Template:Reflist