Line 104: | Line 104: | ||
| Does not turn on | | Does not turn on | ||
| Make sure it is plugged in | | Make sure it is plugged in. If issue continues, a new bulb may be needed. | ||
|- | |- |
Revision as of 01:16, 18 November 2019
Abstract
One paragraph summary of your project from background to discussion and next steps.
There should be an image near the top.
Background
Problem statement and criteria
Use sortable table.
Description of final project
Photos and descriptions. Use gallery (https://www.appropedia.org/Help:Images#Galleries (Links to an external site.)).
Include a how to use and maintain section. See the how to template below.
Prototyping
Use a gallery of prototyping photos and lessons learned.
Costs
Use Help:Table_examples#Cost_Table.
Quantity | Material | Source | Cost ($) | Total ($) |
---|---|---|---|---|
2 | Bolt | Aces | 0.65 | 1.42 |
4 | Washer | Aces | 0.23 | 1.00 |
2 | Nut | Aces | 0.25 | 0.54 |
1 | Acrylic Knife | Amazon | 7.99 | 8.67 |
1 | Acrylic Sheet | Aces | 14.99 | 16.39 |
Total Cost | $246.60 |
Testing Results
How to build
Use Template:How_to
Maintenance
Introduce this maintenance section.
Schedule
This is when to maintain what.
- Daily
- After each use unplug the conductivity probe and wipe down any water with a towel.
Instructions
This is how to maintain. The step by step how to template {{How to}} is most likely best for this part.
Troubleshooting
This is only how to troubleshoot basic operation. For complex issues, say contact Marco at mag233@humboldt.edu.
Problem | Suggestion |
---|---|
Example issue | Example solution or suggestion |
Does not turn on | Make sure it is plugged in. If issue continues, a new bulb may be needed. |
Another issue | Et cetera |
Discussion and next steps
Suggestions for future changes
This is where to lay out suggestions for how to make the project function better in the future.
References
See Help:Footnotes for more. Template:Reflist