SCRAP Humboldt community tinker desk instructions

Building the Community Tinker Desk

Here you will find a list of diagrams that will assist you in recreating the Community Tinker Desk by 'The Planeteers'.

Part#	Material	Length (in.)	Width (in.)	Height (in.)	Quantity
TOP	Door	79 1/4	30 1/4	1 3/4	1
EP1	Door	29 3/4	24 1/4	1 3/4	2
CBL	Door	55 1/4	16	1 3/4	1
T30	Post	29 1/4	1 3/4	5/8	4
TC	Post	11 1/2	1 3/4	5/8	2
TA1^[1]	Post	30 1/4	1 3/4	5/8	2
TA2^[1]	Post	79 1/4	1 3/4	5/8	2
T55	Post	55 1/4	1 3/4	5/8	1

Image:Tinker_Desk_diagram.jpg

Part#	Material	Length (in.)	Width (in.)	Height (in.)	Quantity
BTOP	Door	79 1/4	9 1/2	1 3/4	2
BE^[4]	Door	16 1/2	14 3/4	1 3/4	4
BBC	Door	50	7 1/4	1 3/4	2
TBA1^[1]	Post	9 1/2	1 3/4	5/8	4
TBA2^[1]	Post	79 1/4	1 3/4	5/8	4
TBCC	Post	8 1/2	1 3/4	5/8	4
TAL^[4]	Post	16 3/4	1 3/4	5/8	8

Image:Tinker_Desk_bench_diagram.jpg

↑ ^1.0 ^1.1 ^1.2 ^1.3 Needs 45ᵒ cut for special joining. These Parts require a miter joint in the corners.
↑ ^2.0 ^2.1 Lag bolts require washers and pre-drilled holes for mounting.
↑ ^3.0 ^3.1 Use L-Brackets with at least 1 ¼ inch wood screws. If door thicknesses vary for some reason, use mounting screws that penetrate at least one half the thickness of the wood.
↑ ^4.0 ^4.1 Requires an 80ᵒ cut to prevent bench user from swaying back and forth.