Rain Water Bottler
Project developed by [jfhicks]
Template:Statusboxtop Template:Status-design Template:Status-prototype You can help Appropedia by contributing to the next step in this OSAT's status. Template:Boxbottom
Abstract
- This is a device that collects rain water in a water bottle. It includes a purge container that collects the initial dirty rain water. The reason this water is dirty is due to the sediment that collects on a roof between rain cycles. once the purge container is filled the a ball closes of this container and the clean rain water is diverted into the water bottle.
- Picture of Rain Water Collector
Bill of Materials
- All compents are 3D printable but glue is needed to secure the purge main to the bottle collector and a container with standard bottle thread is need to collect clean water.
- The file used for the bottle neck threads and funnel were designed by laird can be found here [1]
- Image of Parts
- Water Collector Purge scadWater collector purge.scad
- Water Collector Purge stlWater Collector Purge .stl
- Water Purge Pipe SCADFile:Purge pipe.scad
- Water Purge Pipe STL File:Purge pipe.stl
- ScrewBall Desigend by JamieLaing and must be scaled to .55. link to source [2]
- Water collector filler.scad File:Water collector filler.scad
- Water collector filler.stl File:Water collector filler.stl
- Water collector funnel.scad File:Water collector funnel.scad
- Water collector funnel.stl File:Water collector funnel.stl