J.M.Pearce (talk | contribs) mNo edit summary |
|||
(6 intermediate revisions by 3 users not shown) | |||
Line 1: | Line 1: | ||
'''R value''' | |||
==Definitions== | ==Definitions== | ||
The | The materials ability to resist the [[heat transfer]] by [[conduction]] is known as thermal resistance or R-Value. Materials with high R-values have greater insulating capabilities than materials with low R-value numbers. Most construction materials have easy to find R-values, such as insulation you may find at a local hardware store may have R-values ranging from R-19 to R-32. As it would be expected the R-32 insulation has better insulation capabilities than the R-19, but the R-32 is usually more expensive. | ||
R-values can be expressed using basic thermodynamic properties of heat transfer, [[conductivity]] and amount of material in question: | |||
"A measure of the [[resistance]] of the material to heat flow is the [[thermal resistance]] R, often called its | Sine R-values are "A measure of the [[resistance]] of the material to heat flow is the [[thermal resistance]] R, often called its R-value given by R=delta/k. The higher the R-value is, the better are the insulating properties of the material. Using this notation, the rate of heat flow is given by | ||
Qc/t = 1/R*A*change in T | |||
where; | |||
*R is a function of both the type of material and its thickness. | |||
*T=Time | |||
*Qc=Heat transfer | |||
*AL/k = R-value of [[insulation]] | |||
R-value according to Physics by Cutnell and Johnson: | R-value according to Physics by Cutnell and Johnson: | ||
Line 18: | Line 20: | ||
* The R value expresses in a single number the combined effects of thermal conductivity and thickness. | * The R value expresses in a single number the combined effects of thermal conductivity and thickness. | ||
* Larger R values reduce the heat per unit time flowing through the material and therefore mean better insulation. It also convenient to use R values to describe layered slabs formed by sandwiching | * Larger R values reduce the heat per unit time flowing through the material and therefore mean better insulation. It also convenient to use R values to describe layered slabs formed by sandwiching together a number of materials with different thermal ratings and different thicknesses. The R-values for the individual layers can be added to give a single R-value for the entire slab. It should be noted, however, that R-values are expressed using units of feet, hours, F and BTU for thickness, time, temperature, and heat, respectively. | ||
According to the [http://www.engext.ksu.edu/ees/henergy/envelope/basement.html Kansas State University Extension Service] the R-value of soil is about 1 per foot. | |||
==See also== | |||
* [[Thermal mass]] | |||
* [[Earth sheltering]] | |||
== External links == | |||
* [[Wikipedia:R value]] | |||
[[Category:PH261]] | [[Category:PH261]] | ||
[[Category:Heating and cooling]] | [[Category:Heating and cooling]] | ||
[[Category:Thermal insulation]] |
Revision as of 17:26, 2 May 2015
R value
Definitions
The materials ability to resist the heat transfer by conduction is known as thermal resistance or R-Value. Materials with high R-values have greater insulating capabilities than materials with low R-value numbers. Most construction materials have easy to find R-values, such as insulation you may find at a local hardware store may have R-values ranging from R-19 to R-32. As it would be expected the R-32 insulation has better insulation capabilities than the R-19, but the R-32 is usually more expensive.
R-values can be expressed using basic thermodynamic properties of heat transfer, conductivity and amount of material in question:
Sine R-values are "A measure of the resistance of the material to heat flow is the thermal resistance R, often called its R-value given by R=delta/k. The higher the R-value is, the better are the insulating properties of the material. Using this notation, the rate of heat flow is given by
Qc/t = 1/R*A*change in T
where;
- R is a function of both the type of material and its thickness.
- T=Time
- Qc=Heat transfer
- AL/k = R-value of insulation
R-value according to Physics by Cutnell and Johnson:
- The R value expresses in a single number the combined effects of thermal conductivity and thickness.
- Larger R values reduce the heat per unit time flowing through the material and therefore mean better insulation. It also convenient to use R values to describe layered slabs formed by sandwiching together a number of materials with different thermal ratings and different thicknesses. The R-values for the individual layers can be added to give a single R-value for the entire slab. It should be noted, however, that R-values are expressed using units of feet, hours, F and BTU for thickness, time, temperature, and heat, respectively.
According to the Kansas State University Extension Service the R-value of soil is about 1 per foot.