Publication Number T-114
Abstract
This document gives schematic drawings of the assembly and operation of a wind powered water pump. The drawings are accompanied by a list of parts and materials used in the pumps manufacturing.
Publisher
Brace Research Institute MacDonald College McGill University Ste. Anne de Bellevue 800 Quebec Canada H9X 1CO
Installation
Assembly
Piston and Piston Rod
Washers and Piston Head
Operation
Parts and Materials
List of Parts and Materials
- 36 - Nut Bored at 8mm
- 34 - Round HD-Screw 4mm
- 32 - Nut 8mm
- 30 - Iron Rod 8mm
- 28 - Steel Plate 4mm
- 26 - Steel Plate 4mm
- 24 - Rubber Washer 5mm
- 22 - Rubber Washer 5mm
- 20 - Black Steel Plate 4mm
- 18 - Black Steel Plate 4mm
- 16 - Coupling 90mm/100mm
- 14 - Galv. Pipe 33mm/42mm
- 12 - Galv. Pipe 80mm/90mm