No edit summary |
No edit summary |
||
(6 intermediate revisions by 3 users not shown) | |||
Line 1: | Line 1: | ||
{{777}} [[category:4777 TRIZ 3D printers]] | {{777}} | ||
{{TRIZ-3D}} | |||
[[category:4777 TRIZ 3D printers]] | |||
[[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:17, 1 December 2015 (PST) | [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:17, 1 December 2015 (PST) | ||
[[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:19, 1 December 2015 (PST) | [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:19, 1 December 2015 (PST) | ||
Line 16: | Line 18: | ||
#Remove the complicated bits (assembling the printer and making models) of 3D printing to make it more widely adopted and thus everywhere [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:49, 3 December 2015 (PST) | #Remove the complicated bits (assembling the printer and making models) of 3D printing to make it more widely adopted and thus everywhere [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:49, 3 December 2015 (PST) | ||
#Remove printer bed as the constraint for volume, print anywhere with a mobile 3D printer frame [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:50, 3 December 2015 (PST) | #Remove printer bed as the constraint for volume, print anywhere with a mobile 3D printer frame [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:50, 3 December 2015 (PST) | ||
#Remove the print bed, allow the printer to print on any surface [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 06:50, 4 December 2018 (PST) | |||
#Reduce the number of parts/motors by using lasers to heat up/deposit printing material [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 07:08, 4 December 2018 (PST) | |||
#'''Move excess heat from the stepper motors to create a heated bed''' [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 07:08, 4 December 2018 (PST) | |||
#Take out the connected PC interface by sending designs to the printer wirelessly, and monitoring it on a screen [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 07:08, 4 December 2018 (PST) | |||
#Create joints and other printed components with high tolerances and structural rigidity to eliminate the use of the extra wood components [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 07:08, 4 December 2018 (PST) | |||
#Reduce heat/noise from motors by eliminating them and using a stepped magnetic track to control axis movement [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 07:08, 4 December 2018 (PST) | |||
#Implement snap joints and press fits to eliminate the use of fasteners [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 07:08, 4 December 2018 (PST) | |||
#Implement magnetic joints to eliminate fasteners [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 07:08, 4 December 2018 (PST) | |||
#'''Have the printer create the g-code of the model dynamically (layer by layer) to allow for quick adjustments on the fly and removing the use of a third party slicer''' [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 07:08, 4 December 2018 (PST) | |||
#Have the printer use low temp materials to eliminate the use of the hot-end [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 07:08, 4 December 2018 (PST) | |||
#Use stainless steel guide rods to prevent rusting instead of using grease [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 07:08, 4 December 2018 (PST) | |||
#Use sonic levitation too allow the printer to print on a thin strip of air, removing use of print bed. [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 07:08, 4 December 2018 (PST) | |||
#Use of higher resolution stepper motors to print at a higher resolution and with less noise [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 07:13, 4 December 2018 (PST) | |||
#Use excess noise and vibration to run a small generator to make extra power to run the printer [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 07:13, 4 December 2018 (PST) | |||
#Use E-mag waves in the air from power lines, cell phone towers, radio towers to power the printer, eliminating the wall plug. [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 07:13, 4 December 2018 (PST) | |||
#Place high efficiency solar cells to the printer to eliminate the power supply [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 07:13, 4 December 2018 (PST) | |||
#Use human energy to run [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 07:13, 4 December 2018 (PST) | |||
# '''Remove part cooling fan, use excess heat from hotend to heat a thermal powered fan to cool part''' [[User:Q. I. Kaspriak|Q. I. Kaspriak]] ([[User talk:Q. I. Kaspriak|talk]]) 07:27, 4 December 2018 (PST) | |||
# '''Use horizontal lazer/UV field to instantaneously cure liquid resin from FDM nozzle''' [[User:Q. I. Kaspriak|Q. I. Kaspriak]] ([[User talk:Q. I. Kaspriak|talk]]) 07:27, 4 December 2018 (PST) | |||
# Remove extruder motor, Use gravity driven filament driver gear and electrically controlled brake to feed filament [[User:Q. I. Kaspriak|Q. I. Kaspriak]] ([[User talk:Q. I. Kaspriak|talk]]) 07:27, 4 December 2018 (PST) | |||
# Remove auto bed leveling, use floatation to level printer and print bed, then fix mechanically in place [[User:Q. I. Kaspriak|Q. I. Kaspriak]] ([[User talk:Q. I. Kaspriak|talk]]) 07:27, 4 December 2018 (PST) |
Revision as of 15:31, 4 December 2018
Bllafata (talk) 07:17, 1 December 2015 (PST) WayneHelminen (talk) 07:19, 1 December 2015 (PST)
- Smart slicing based on the printer, uploading the model to the printer should slice and create the gcode locally. Bllafata (talk) 07:53, 1 December 2015 (PST) WayneHelminen (talk) 07:44, 3 December 2015 (PST)
- Remove print head and use concentrated sunlight on a powder/gel to build the print WayneHelminen (talk) 07:52, 1 December 2015 (PST) Bllafata (talk) 07:32, 3 December 2015 (PST)
- Remove the motors, replace the mechanical pulley system with electromagnets to move the belt up and down. Bllafata (talk) 07:51, 1 December 2015 (PST) WayneHelminen (talk) 07:53, 1 December 2015 (PST)
- To make it safer, remove the hotend and print with foam (or other low temp materials)Bllafata (talk) 07:32, 3 December 2015 (PST) WayneHelminen (talk) 07:44, 3 December 2015 (PST)
- Subtractive 3D printing with syringe from gel WayneHelminen (talk) 07:34, 3 December 2015 (PST) Bllafata (talk) 07:37, 3 December 2015 (PST)
- Reduce the cost of the printer by removing most of the electronics and having the computer have more direct control of the printer Bllafata (talk) 07:37, 3 December 2015 (PST) WayneHelminen (talk) 07:44, 3 December 2015 (PST)
- Reduce waste by having none. Recycle failed prints right back into the printer with a built in recyclerBllafata (talk) 07:43, 3 December 2015 (PST) WayneHelminen (talk) 07:44, 3 December 2015 (PST)
- Remove atmosphere to reduce friction so that you can print fasterBllafata (talk) 07:47, 3 December 2015 (PST)
- Remove atmosphere to improve print quality because less containments in the airBllafata (talk) 07:47, 3 December 2015 (PST)
- Remove hotend print with lasers Bllafata (talk) 07:47, 3 December 2015 (PST)
- Remove extruder drive, use gravity system instead Bllafata (talk) 07:47, 3 December 2015 (PST)
- Remove the complicated bits (assembling the printer and making models) of 3D printing to make it more widely adopted and thus everywhere Bllafata (talk) 07:49, 3 December 2015 (PST)
- Remove printer bed as the constraint for volume, print anywhere with a mobile 3D printer frame Bllafata (talk) 07:50, 3 December 2015 (PST)
- Remove the print bed, allow the printer to print on any surface Jrjarvis (talk) 06:50, 4 December 2018 (PST)
- Reduce the number of parts/motors by using lasers to heat up/deposit printing material Jrjarvis (talk) 07:08, 4 December 2018 (PST)
- Move excess heat from the stepper motors to create a heated bed Jrjarvis (talk) 07:08, 4 December 2018 (PST)
- Take out the connected PC interface by sending designs to the printer wirelessly, and monitoring it on a screen Jrjarvis (talk) 07:08, 4 December 2018 (PST)
- Create joints and other printed components with high tolerances and structural rigidity to eliminate the use of the extra wood components Jrjarvis (talk) 07:08, 4 December 2018 (PST)
- Reduce heat/noise from motors by eliminating them and using a stepped magnetic track to control axis movement Jrjarvis (talk) 07:08, 4 December 2018 (PST)
- Implement snap joints and press fits to eliminate the use of fasteners Jrjarvis (talk) 07:08, 4 December 2018 (PST)
- Implement magnetic joints to eliminate fasteners Jrjarvis (talk) 07:08, 4 December 2018 (PST)
- Have the printer create the g-code of the model dynamically (layer by layer) to allow for quick adjustments on the fly and removing the use of a third party slicer Jrjarvis (talk) 07:08, 4 December 2018 (PST)
- Have the printer use low temp materials to eliminate the use of the hot-end Jrjarvis (talk) 07:08, 4 December 2018 (PST)
- Use stainless steel guide rods to prevent rusting instead of using grease Jrjarvis (talk) 07:08, 4 December 2018 (PST)
- Use sonic levitation too allow the printer to print on a thin strip of air, removing use of print bed. Jrjarvis (talk) 07:08, 4 December 2018 (PST)
- Use of higher resolution stepper motors to print at a higher resolution and with less noise Jrjarvis (talk) 07:13, 4 December 2018 (PST)
- Use excess noise and vibration to run a small generator to make extra power to run the printer Jrjarvis (talk) 07:13, 4 December 2018 (PST)
- Use E-mag waves in the air from power lines, cell phone towers, radio towers to power the printer, eliminating the wall plug. Jrjarvis (talk) 07:13, 4 December 2018 (PST)
- Place high efficiency solar cells to the printer to eliminate the power supply Jrjarvis (talk) 07:13, 4 December 2018 (PST)
- Use human energy to run Jrjarvis (talk) 07:13, 4 December 2018 (PST)
- Remove part cooling fan, use excess heat from hotend to heat a thermal powered fan to cool part Q. I. Kaspriak (talk) 07:27, 4 December 2018 (PST)
- Use horizontal lazer/UV field to instantaneously cure liquid resin from FDM nozzle Q. I. Kaspriak (talk) 07:27, 4 December 2018 (PST)
- Remove extruder motor, Use gravity driven filament driver gear and electrically controlled brake to feed filament Q. I. Kaspriak (talk) 07:27, 4 December 2018 (PST)
- Remove auto bed leveling, use floatation to level printer and print bed, then fix mechanically in place Q. I. Kaspriak (talk) 07:27, 4 December 2018 (PST)